Replaces

Jeep Liberty Wrangler Brake Rotor Pair Nakamoto 53010-DSZ - 1APBR00094

Part Details

  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: Pair
  • Brake Rotor Coating: Zinc Coated
  • Rear Brake Rotor Specifications:
    Solid
    11.22" (285mm)
    5 Lug
  • Product Line: Performance

These performance brake rotors are just what you need to get your vehicle stopping great again!

Specifications:

  • Comes as a matched Pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fit 5 Lug Wheels
  • Direct replacements

These brake rotors make a great replacement and are an excellent performance upgrade over your worn original rotors.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:41)
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (0:58)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brakes (1:14)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the caliper piston in with a flat blade screwdriver
    • Pull the caliper aside
    • Pry the brake pads out of the caliper with a flat blade screwdriver
    • Pull the rotor off
  4. step : Preparing the New Brake Pads and Rotors (2:04)
    • Clean the rotor with brake parts cleaner
    • Apply grease to the brake pad tabs
    • Clean the brake pad slides with a wire brush
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Check that the caliper slides move freely
    • If necessary, apply grease to the caliper slides
  5. step : Installing the New Brakes (3:11)
    • Slide the rotor on
    • Install the new brake pads into the caliper
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten bolts to between 20 - 25 foot-pounds of torque
  6. step : Reattaching the Wheel (4:22)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the wheel cover
  7. step : Testing the Brakes (4:54)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Bearing Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2007Jeep Liberty Jeep Liberty Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
2003-2006Jeep Wrangler Jeep Wrangler Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto

This part replaces:

  • Nakamoto 53010-DSZ
Part #: 1APBR00094


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 53010-DSZ

How-to Video:

(05:37 min)