Replaces

Jeep Liberty Wrangler Brake Kit Nakamoto MD981, 53010 - 1ABFS01995

Brake Pad Specifications:

  • Professional Grade Semi Metallic Disc Brake Pads
  • 4 Piece Rear brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a Pair
  • Fits LH (Driver Side) & RH (Passenger Side) Rear
  • Fits 5 lug wheels
  • Solid - not vented

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:41)
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (0:58)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brakes (1:14)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the caliper piston in with a flat blade screwdriver
    • Pull the caliper aside
    • Pry the brake pads out of the caliper with a flat blade screwdriver
    • Pull the rotor off
  4. step : Preparing the New Brake Pads and Rotors (2:04)
    • Clean the rotor with brake parts cleaner
    • Apply grease to the brake pad tabs
    • Clean the brake pad slides with a wire brush
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Check that the caliper slides move freely
    • If necessary, apply grease to the caliper slides
  5. step : Installing the New Brakes (3:11)
    • Slide the rotor on
    • Install the new brake pads into the caliper
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten bolts to between 20 - 25 foot-pounds of torque
  6. step : Reattaching the Wheel (4:22)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the wheel cover
  7. step : Testing the Brakes (4:54)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Bearing Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Perfect fit
Quality appears better than the originals. Truly a drop in job. Excellent pricing.
July 8, 2017
Purchased
over 2 years ago
Great way to repair your car
The cost of the products I purchased were half the price of the auto stores in my area. The parts work well and are made to fit the automobile I chose. Overall a great deal for self repair. The videos that you offered my the job so much easier.
February 18, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(05:37 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Bearing Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver



This part replaces:

  • Nakamoto MD981, 53010

Vehicle Fit

  • 2003-2007 Jeep Liberty Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2003-2006 Jeep Wrangler Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
Part #: 1ABFS01995

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD981, 53010

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More