Jeep Liberty Wrangler Blower Motor Resistor - 1AHBR00011

This Jeep blower motor resistor is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! On most vehicles it is mounted to the HVAC unit inside the passenger compartment. It can be accessed from the passenger foot well area.


  • New, not remanufactured or rebuilt
  • Direct replacement
  • Replaces dealer part number: 5139719AA
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • 5 spade terminal connection

If you are experiencing intermittent stopping during use or the fan only works in one position this may be your solution!


Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed


Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Blower Motor Resistor (0:28)
    • Open the glove box, push in the sides, and pull it down
    • Push the red tab underneath the resistor harnesses with a 90-degree pick
    • Push the tab on the resistor harness and pull it free
    • Remove the two 8mm bolts from the blower motor resistor
    • Remove the blower motor resistor
  2. step : Installing the New Blower Motor Resistor (1:16)
    • Insert the blower motor resistor into its slot
    • Replace the two 8mm bolts into the resistor
    • Connect the resistor harness

Tools needed for replacement:

    General Tools

  • Pick

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 8mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Perfect fit replacement
Perfect replacement part. Fit perfectly & installed easily. I’ll be dialing up 1A Auto for all of my auto replacement part needs! Highly recommend you do the same!
April 1, 2018
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2007 Jeep Liberty Blower Motor Resistor
  • 2002-2006 Jeep Wrangler Blower Motor Resistor

This part replaces:

  • OE # 5066552AA
  • OE # 5139719AA
  • Dorman 973-025
  • Standard Motor Products RU-352
Part #: 1AHBR00011

How-to Video:

(02:18 min)