Replaces

Jeep Liberty Window Regulator Passenger Side Rear - 1AWRG01583

This replacement window regulator with motor is just what you need to get your vehicle in good shape again!

Specifications:

  • RH (Passenger Side) REAR
  • Includes power window motor
  • Power operation
  • Direct replacement
  • Built to strict quality control standards
NOTE: This regulator is an updated design, and may look different from the original factory part. It is designed as an upgrade from the factory regulator to provide longer life.

NOTE: There are multiple styles of glass mounting brackets available for some of these applications. Please check before ordering.

This window regulator with motor makes a great replacement and has good cost savings over a dealer unit.

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    •  This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it, you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (1:04)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the Phillips head screw inside the door handle
    • Remove the Phillips head screw inside the door pull
    • Pry out the door panel clips with a putty knife or flat blade screwdriver
    • Lift the door panel up and off
    • Disconnect the door handle rod from the door handle
    • Remove the three Phillips head screws from the speaker
    • Disconnect the speaker wiring lead
    • Pull off the speaker
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (2:35)
    • Loosen the clips that hold the window to the regulator with a flat blade screwdriver
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Push out the black clip holding the regulator cable to the door
    • Remove the three 10mm bolts from the regulator
    • Remove the three 10mm bolts from the window motor
    • Push the red clip on the window motor
    • Disconnect the window motor lead
    • Pull the window regulator out through the door
  3. step : Reinstalling the Regulator (4:45)
    • Swap over the old bolts to the new regulator
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the three10mm bolts into the regulator
    • Insert the three 10mm bolts into the window motor
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the clips that hold the window to the regulator
  4. step : Reinstalling the Door Panel (6:33)
    • Put the water shield into place
    • Connect the speaker wiring lead
    • Put the speaker into place
    • Insert the three 10mm bolts into the speaker
    • Connect the latch cables to the door handle
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips screw into the door pull
    • Insert the Phillips screw into the door handle
    • Push on the trim piece inside the door handle

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.8 / 5.0
17 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
14
2
1
0
0
Awesome. A lot better then the original part, thank You.
October 15, 2011
awesome thank you
This product fulfilled my neighbors needs he thanks yo u
June 17, 2017
Purchased
11 months ago
Worked great!
Definitely not the OEM design but looks and feels better. In addition, the price was very reasonable. I used 1aauto's youtube videos to figure out how to remove it and install it. The one I saw spoke of drilling out a rivet and detaching parts after the old one was pulled out. That was not needed for this kit. Just take out the old one and put in the new. Their video tip of taping the window before replacing the part was a good idea. Make sure the lock and handle works after you put it all back together!
September 20, 2017
Purchased
5 months ago
Great Instructions In Youtube Video. Part Works Perfectly!
5 Stars, great service & quality parts! I watched the YouTube video they made on this part and it was a simple repair. One thing to note for anyone is that the video towards the end appears to show a way to unscrew something and put something back on your original part you are taking off. Ignore that section of the video as this part is a complete replacement so you can get rid of the entire old part you take out. I will be back for more parts, thanks!
July 8, 2017
Purchased
7 months ago
slick sale. no problems
The regulator came sooner than forecast , fit perfectly, and is working well. No problems all around.
July 6, 2017
Purchased
8 months ago
Better design
I have only had this for a week, but it is working great so far. I prefer the improved design. It makes a lot more sense than the original factory design. Installation is a lot easier than I expected
July 19, 2017
Purchased
7 months ago
Jeep Liberty Window Regulator Passenger Side Rear - 1AWRG01583
Easy to install under 45 minutes and works better than the original equipment at a very affordable cost.
March 25, 2017
Purchased
11 months ago
2002 Jeep Liberty rear window regulator.
Super easy install and exact fit. Thanks to the how to video got er done in an hour. Works like factory new.
August 26, 2017
Purchased
6 months ago
Second repair same window
Same small plastic clip broke on window seldom used, quick repair but received same part I used last time. Hope this one lasts longer.
October 12, 2017
Purchased
4 months ago
Works great, easy to replace.
Probably should have bought all four regulators. Very easy to install.
October 25, 2017
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:11 min)

Tools List:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • Hollander 135-01869R
  • OE # 55360034AJ

Vehicle Fit

  • 2002-2005 Jeep Liberty Power Window Regulator with Motor Rear Passenger Side (High Quality)
  • 2006 Jeep Liberty Power Window Regulator with Motor Rear Passenger Side (Built Before 1/19/06 Production Date) (High Quality)
Part #: 1AWRG01583

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More