Replaces

Jeep Liberty Window Regulator Pair - 1AWRK00839

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Quantity:   Pair
  • Operation:   Power

These power window regulators are just what you need to get your vehicle in good shape again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR DOORS
  • Include the power window motors
  • Direct replacements
  • Built to strict quality control standards
NOTE: These regulators are an updated design, and may look different from the original factory parts. They are designed as an upgrade from the factory regulators to provide longer life.

NOTE: There are multiple styles of glass mounting brackets available for some of these applications. Please check before ordering.

These power window regulators make great replacements and have substantial cost savings over dealer units.

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle if this window regulator does not fit the application stated.
  • This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:40)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the Phillips head screw inside the door pull
    • Remove the Phillips head screw inside the door handle
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Disconnect the lock rod from the door handle
    • Remove three Phillips screws from the speaker
    • Pry off the speaker cover
    • Disconnect the speaker wiring lead
    • Carefully peel off the water shield
  2. step : Removing the Regulator (2:17)
    • Pry off the metal clip holding the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Push the black clip connected to the wiring through the door
    • Remove the three 10mm bolts from the regulator
    • Remove the three 10mm bolts from the window motor
    • Pull the window regulator down through the door
    • Disconnect the motor wiring lead
    • Pull the window regulator out through the door
  3. step : Removing the Regulator Kit (4:11)
    • Drill out the rivet on the regulator with an 11/64 drill bit
    • Pry up the two tabs on the regulator with a flat blade screwdriver
    • Pry the plastic off the regulator with a flat blade screwdriver
    • Slide the metal bracket off the regulator assembly
    • Twist the window clip off the coil
  4. step : Installing the Regulator Kit (5:13)
    • Twist the new window clip onto the coil
    • Slide the regulator assembly onto the rail
    • Reconnect the two tabs on the regulator
    • Pinch the tabs down with a pair of pliers
    • Place a bolt, washer, and nut from the new assembly through the rivet
    • Tighten the bolt, washer, and nut with a Phillips screwdriver
    • Push the clip onto the window clip
  5. step : Reinstalling the regulator (6:45)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the three 10mm bolts from the window motor
    • Insert the three 10mm bolts from the regulator
    • Connect the motor wiring lead
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Push the window into the slide and clip it
  6. step : Reinstalling the Door Panel (8:08)
    • Put the water shield into place
    • Connect the speaker wiring lead
    • Put the speaker into place
    • Insert the three Phillips screws into the speaker
    • Connect the lock rod to the door handle
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips screw into the door handle
    • Push on the trim piece inside the door handle
    • Insert the two Phillips screws into the door pull

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill
  • 11/64 Inch Drill Bit

  • General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
good parts always
I have never gotten a bad part from these people and this part was the quality I have come to expect.
April 24, 2017
Easier than OEM
I purchased my Jeep with two back windows that didn’t work. Bought this as a set for both and the price was right on point. They even went in easier than the OEM parts came out. I couldn’t have asked for an easier job if I paid someone to do it for me. Overall impressed with the parts and this company.
July 15, 2018
Easy to install and sent quick. Video very helpful in installation.
August 8, 2018
regulators
Very well pleased with these, Shipping wasfast and the installation was very smooth . They look a lot different than the original but fit and work very well. Thanks
November 26, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006Jeep Liberty Jeep Liberty (Built After 2/25/06 Production Date) Rear Power Window Regulator with Motor Pair
2007Jeep Liberty Jeep Liberty Rear Power Window Regulator with Motor Pair
Part #: 1AWRK00839


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:46 min)