Jeep Liberty Wheel Bearing & Hub Assembly TRQ BHA53447 - 1ASHS00190


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • 3 bolt flanges
  • Direct replacements
  • Fits 5 lug wheels
  • Wheel studs already installed
  • Have ABS with integral sensors with correct plugs
Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA53971 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (0:47)
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:13)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Pry the rotor back with a pry bar
    • Remove the two 12mm bolts from the brake caliper
    • Pull the caliper aside
    • Hang the caliper with wire ties
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (2:04)
    • Remove the two 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  4. step : Removing the Wheel Hub (2:28)
    • Disconnect the ABS sensor wire from the wheel hub with a flat blade screwdriver
    • Pry the wire out of all its clips
    • Pry the wiring harness clip off of the stud inside the engine compartment
    • Disconnect the ABS wiring harness in the engine compartment
    • Pull the wiring out through the wheel well
    • Have an assistant hold the hub in place with a pry bar
    • Remove the 35mm hub nut
    • Remove the three E14 external Torx bolts from the hub
    • Thread the lower left E14 bolt 1/3 of the way in
    • Strike the hub with a hammer to loosen it
  5. step : Installing the New Wheel Hub (5:28)
    • Clean the hub mounting area with a wire brush
    • Apply brake grease to the new hub
    • Put the new hub into place
    • Insert the three E14 bolts into the hub
    • Tighten the three E14 bolts to 50 foot-pounds of torque
    • Have an assistant hold the hub in place with a pry bar
    • Fasten on the 35mm hub nut
    • Tighten the hub nut to 100 foot-pounds
    • Feed the new ABS wiring into place
    • Connect the ABS wiring harness at the wheel hub
    • Clip the wiring into place
    • Connect the ABS wiring harness in the engine compartment
    • Clip the ABS wiring on the stud in the engine compartment
  6. step : Reinstalling the Brake Rotor (8:04)
    • Slide the rotor on
    • Put the bracket back into place
    • Start the 21mm bolts by hand
    • Tighten the 21mm bolts to between 85 foot-pounds of torque
  7. step : Reinstalling the Brake Pads (8:41)
    • Install the new brake pads into the bracket
    • Cut the brake caliper free
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread the two 12mm bolts by hand
    • Tighten bolts to between 20 - 25 foot-pounds
  8. step : Reattaching the Wheel (9:40)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the wheel cover
  9. step : Testing the Brakes (10:14)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Large C-Clamp
  • Jack Stands
  • Assistant

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 35mm Socket
  • 19mm Socket
  • 21mm Socket

  • Torx Drivers & Sockets

  • E14 Inverted Socket

4.9 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Excellent x3; Service, Quality, Value
Great product for an awesome price! Service second to none!
February 21, 2018
4 months ago
Worked as stated. Nuff said
The parts arrived quickly, and got perfectly in my 2006 Liberty. The install video was spot on. Only been a few months, but working great. Speed sensors function perfectly.
February 14, 2018
6 months ago
Great piece
Just the right piece for my vehicle, the ABS sensor that’s attached to the assembly was a little tight at its angle but one you tighten the torx bolts down you are all set. Comes with all the clubs to attach on the brake line but used the original as the new ones were for a thinner brake cable. Great product overall and would highly suggest still!
February 10, 2018
4 months ago
Excellent service
That was about the fastest service I have ever received with working thru the internet. The wheel bearing and hub assembly was everything I needed. I'm very pleased with the product and service. I highly recommend this company.
January 2, 2018
6 months ago
Excellent service all around
How to video was great and the parts received were of high quality and delivered on time. This is the best place for do it your selfers! Will definitely buy from again.
July 10, 2017
12 months ago
fast response
wheel bearings arrived in a matter of days and were as advertised. saved significant money over dealership quote. had local garage install them with no issue.seemed to match OEM.
June 30, 2017
1 year ago
Wheel bearing/hub assembly
Great price and super easy to install! I would definitely recommend this supplier for their great parts and service! It's nice to deal with people who know what they're talking about!
May 22, 2017
1 year ago
You get what you pay for.
OEM part from a local parts warehouse was quoted at $200 each. These were less than $60 each.

BOTH arrived with substandard cushioning in the package that allowed the part to roll around a bit in the box. As its a heavy part this caused the ABS wire to be sliced in half at two locations on one hub and one location on the other.

As I needed my vehicle that day I decided to splice the ABS wire myself rather than go through the hassle and time of contacting customer support.

Bottom line, part appears to be of decent quality although I can not attest to its long term viability.

Packaging is a fail and should have never left the warehouse in that conduction.
March 2, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 8 answers
would this fit a 4x4 jeep liberty limited 3.7 ?
Roberto L on Apr 1, 2016
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
What's the difference between the others sold individually, are they the same material or different kind and brand?
DeyvisDeys on Nov 26, 2016
BEST ANSWER: They are the same. Some are sold in pairs versus one side only. Just make sure if you have abs or not before ordering. hope this helps

Vehicle Fit

  • 2002-2005 Jeep Liberty with ABS Brakes Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2006-2007 Jeep Liberty Front Wheel Bearing & Hub Assembly Pair TRQ

This part replaces:

  • TRQ BHA53447
Part #: 1ASHS00190

Brand #: BHA53447

How-to Video:

(10:56 min)