This replacement Jeep Liberty tail light is just what you need to get your Jeep in good looking form again!

This tail light features:

  • Left Hand (Driver side)
  • Replaces dealer Part Numbers: 55157061AC, 55157061AD, 55157061AE
  • Mounts on 1/4 panel
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Not correct for tail lights with tail lamp guards
  • Built to strict quality control standards
  • Bulbs and wiring not included

This Jeep Liberty tail light makes a great replacement and has good cost savings over a dealer unit.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the tail light assembly (0:38)
    • Remove the two T20 Torx bolts
    • Firmly pull the tail light assembly out.
    • If all you need are new bulbs, disconnect them and replace them and continue to step 2.
    • Disconnect the wiring harness lead and unclip the wiring from the back of the assembly.
    • Transfer the bulbs to the new assembly, or install new bulbs into the new assembly.
  2. Open the tailgate and use a socket extension and Torx bit to access the driver's side Torx bolts.

  3. step : Install the tail light assembly (1:35)
    • Connect the wiring harness if you disconnected it.
    • Line up the pins and clip the tail light into the vehicle.
    • Secure with your T20 Torx Drivers.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T20 Torx Driver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Great product and super fast delivery!
This was an exact replacement part for my vehicle. I was extremely impressed by the fast delivery, plus the accompanying installation video was very helpful! I will absolutely recommend 1A Auto to all of my friends! Thanks!!!
April 14, 2018
Purchased
2 months ago
Tail Light and Window Strut Order
My recent order of the aforementioned parts left me completely satisfied! The parts were a perfect OEM part fit, and the products were of very good quality. The order process was extremely easy and quick, and delivery was right on schedule and very timely.

I WILL be placing future part orders . . . 1A Auto has earned my future business!
July 30, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2006 Jeep Liberty Tail Light Driver Side without Tail Lamp Guard
  • 2007 Jeep Liberty Tail Light Driver Side without Tail Lamp Guard

This part replaces:

  • Partslink CH2800158
  • Hollander 166-02216AL
  • OE # 55157061AC AD AE
  • TYC 11-5886-91-1
  • DEPO 333-1932L-AF-CR
Part #: 1ALTL00579

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:01 min)