1ASFK04010-Jeep Liberty Steering & Drivetrain Kit 4 Piece Set


Jeep Liberty Steering & Drivetrain Kit 4 Piece Set TRQ PSA59512


Part Details

  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Wheel Bearing & Hub Assemblies
  • Quantity: 4 Piece Set
  • Bearing Type: Ball Bearing

This part replaces:

  • Hollander 538-01581R
  • Hollander 538-01582L
  • Moog ES3535
  • Moog ES3536
  • OE # AE
  • OE # AB
  • OE # AF
  • OE # 52128693AA
  • OE # 52128692AA
  • OE # 5072444AA
  • OE # 5072445AA
Save 37%
List: $189.95 Save: $70.00
Part 1ASFK04010
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA59512
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Bearing Type:   Ball Bearing
  • Quantity:   4 Piece Set
  • Kit Includes:
      (2) Front Outer Tie Rods
      (2) Front Wheel Bearing & Hub Assemblies


  • Brand New Steering & Suspension Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:50)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:06)
    • Mark the center of the tie rod end
    • Measure the distance from the end of the boot to the center of the tie rod end
    • Note that measurement
    • Remove the 21mm nut from the tie rod end
    • Loosen the 15/16 inch nut that connects the outer to the inner tie rod
    • Strike the wheel knuckle with a hammer to loosen the tie rod end
    • Lift the tie rod out of the wheel knuckle
    • Hold the inner tie rod with vise grip pliers
    • Twist off the outer tie rod
  3. step : Installing the New Outer Tie Rod (2:14)
    • Twist the new outer tie rod onto the inner tie rod
    • Start the 21mm nut onto the tie rod end
    • Hold the tie rod stud with a 10mm socket and ratchet
    • Tighten the nut with a 21mm wrench
    • Measure the distance from the end of the boot to the center of the tie rod end
    • This should be the same as the measurement from Step 2
    • Tighten the 15/16 inch nut
  4. step : Reattaching the Wheel (2:58)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque in a crossing or star pattern
    • Have your vehicle professionally aligned

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Measuring Tape

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 21mm wrench

  • Wrenches - SAE

  • 15/16 Inch Wrench

Fits the following Makes:

Year Make Model Description
2002-2005Jeep Liberty Jeep Liberty with ABS Brakes Steering & Drivetrain Kit 4 Piece Set
2006-2007Jeep Liberty Jeep Liberty Steering & Drivetrain Kit 4 Piece Set

Part Interchange

Brand Label Part Number
Chicago Rawhide BR930224
Chicago Rawhide BR930225
Chrysler 52128692AE
Chrysler 52128693AE
Chrysler 52128693AD
Chrysler 52128692AD
Chrysler 52128693AA
Chrysler 52128692AC
Chrysler 52128692AF
Chrysler 52128693AC
Chrysler 52128692AB
Chrysler 52128692AA
Chrysler 52128693AF
Chrysler 52128693AB
DIY Solutions SUS07561
DIY Solutions SUS07560
Drive Tech America NT513177
Drive Tech America NT513176
GMB 720-0257
GMB 720-0258
Jeep 52128693AD
Jeep 52128692AE
Jeep 52128693AE
Jeep 52128692AD
Jeep 52128692AC
Jeep 52128693AB
Jeep 52128693AA
Jeep 52128693AC
Jeep 52128692AF
Jeep 52128692AB
Jeep 52128693AF
Jeep 52128692AA
Jeep 5072444AA
Jeep 5072445AA
MOOG Chassis Products ES3536
MOOG Chassis Products ES3535
MOOG Hub Assemblies 513176
MOOG Hub Assemblies 513177
Mevotech H513176
Mevotech H513177
Raybestos 713177
Raybestos 713176
Raybestos Brakes 713177
Raybestos Brakes 713176
SKF BR930225
SKF BR930224
Timken HA599455L
Timken HA599455R

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA59512
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Jeep Liberty Steering & Drivetrain Kit 4 Piece Set TRQ PSA59512-1ASFK04010 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.