Replaces

Jeep Liberty Rear Passenger Side Power Window Regulator with Motor TRQ - 1AWRG01764

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

This power window regulator is just what you need to get your vehicle in good shape again!

Specifications:

  • RH (Passenger Side) REAR DOOR
  • Includes the power window motor
  • Direct replacement
  • Built to strict quality control standards
NOTE: This regulator is an updated design, and may look different from the original factory part. It is designed as an upgrade from the factory regulator to provide longer life.

NOTE: There are multiple styles of glass mounting brackets available for some of these applications. Please check before ordering.

This power window regulator makes a great replacement and has good cost savings over a dealer unit.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Door Panel (0:40)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the Phillips head screw inside the door pull
    • Remove the Phillips head screw inside the door handle
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Disconnect the lock rod from the door handle
    • Remove three Phillips screws from the speaker
    • Pry off the speaker cover
    • Disconnect the speaker wiring lead
    • Carefully peel off the water shield
  2. step : Removing the Regulator (2:17)
    • Pry off the metal clip holding the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Push the black clip connected to the wiring through the door
    • Remove the three 10mm bolts from the regulator
    • Remove the three 10mm bolts from the window motor
    • Pull the window regulator down through the door
    • Disconnect the motor wiring lead
    • Pull the window regulator out through the door
  3. step : Removing the Regulator Kit (4:11)
    • Drill out the rivet on the regulator with an 11/64 drill bit
    • Pry up the two tabs on the regulator with a flat blade screwdriver
    • Pry the plastic off the regulator with a flat blade screwdriver
    • Slide the metal bracket off the regulator assembly
    • Twist the window clip off the coil
  4. step : Installing the Regulator Kit (5:13)
    • Twist the new window clip onto the coil
    • Slide the regulator assembly onto the rail
    • Reconnect the two tabs on the regulator
    • Pinch the tabs down with a pair of pliers
    • Place a bolt, washer, and nut from the new assembly through the rivet
    • Tighten the bolt, washer, and nut with a Phillips screwdriver
    • Push the clip onto the window clip
  5. step : Reinstalling the regulator (6:45)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the three 10mm bolts from the window motor
    • Insert the three 10mm bolts from the regulator
    • Connect the motor wiring lead
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Push the window into the slide and clip it
  6. step : Reinstalling the Door Panel (8:08)
    • Put the water shield into place
    • Connect the speaker wiring lead
    • Put the speaker into place
    • Insert the three Phillips screws into the speaker
    • Connect the lock rod to the door handle
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips screw into the door handle
    • Push on the trim piece inside the door handle
    • Insert the two Phillips screws into the door pull

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill
  • 11/64 Inch Drill Bit

  • General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.80/ 5.0
15 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
13
1
1
0
0
Lady on phone very helpful arrived on time fit perfect no problems would recommend to any one
January 22, 2017
Great Product
After getting the cumbersome factory busted unit out of the door, your parts went right in with little effort, considering the tight space it had to go in. After installation, they work better than factory. Side by side, your parts seemed to be much more robust and redesigned for more efficient operation. I now have your regulators in 3 out of 4 doors in my 07 Jeep Liberty, and will be replacing the 4th when the Mopar original inevitably fails.
February 26, 2017
Very pleased with the new design.
I was looking for exactly what I was taking out and had a hard time finding it, and this one said it would work, so I gave it a shot. It fit perfectly and was a whole lot easier to install.
March 3, 2017
Jeep window regulator
He window regulator came on time and it was easy to install. I would recommend this company to others. Thank you for making my car repair easy.
July 19, 2017
Window regulator
Correct part, great price. Love 1A Autos easy-to-follow how-to videos. Will definitely recommend!
August 20, 2017
Jeep Liberty window regulator
Item worked out pretty good. Only complaint is that the nut zerts that were glued to back of motor had one that was off center and when I tried to screw bolt in it popped off. I had to go to hardware store and get a6 mm x1.5 pitch nut to mount it
September 12, 2017
Great Savings. No Fuss
I ordered a window regulator at a fraction of the auto dealer price. I am not mechanically inclined so followed the easy installation video and had everything working in no time.
November 16, 2017
The BEST parts!
Had a regulator problem that was quoted at $165 to have fixed. I ordered the part for $49 and was able to do it myself. Quality product and easy to install. Their videos on Youtube were great and step-by-step instructions saved me a trip to the mechanic. Highly recommend if you need parts and can possibly do the job yourself.
May 4, 2018
great service not stock part works better than original deliver fast would use 1A Auto anyX thanks!
August 21, 2018
Window lift worked perfectly
Switched out bad window motor took 20 minutes and thanks to 1aauto saved two hundred dollars
March 3, 2019
Perfect item
Thanks to A1 for helping & getting the correct version for my Jeep. It was correct the first time.
April 13, 2019
Window regulator replacement
Delivery was as promised and installation was a snap following the online video instructions. Have and will use again and again
May 10, 2019
Works great, easy install.
Watch the video for easy installation. Take the time to remove the door panel and double check which connector is on your window. The driver side was different than the passenger side on mine.
September 4, 2019
A1 is A1 with me
Got a rear jeep liberty window regulator from the local auto store...it was cumbersome and not the correct part...watched videos on how to install it..then went back on a watched video and seen the A1 auto was the sponser and it looked very simple ..ordered the part from there it came early and it was simple as the video showed it to be thank you for awesome products and for making me look like i knew what i was doing...
October 16, 2019
Great!
The window regulator fit perfectly and it was easy to install.
November 28, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006Jeep Liberty Jeep Liberty (Built After 2/25/06 Production Date) Rear Passenger Side Power Window Regulator with Motor
2007Jeep Liberty Jeep Liberty Rear Passenger Side Power Window Regulator with Motor
Part 1AWRG01764
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: WRA52289