Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Light 2003-04 Jeep Grand Cherokee
How to Replace Tail Lights 1999-2004 Jeep Grand Cherokee
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Tail Light
Remove the two Phillips screws from the tail light.
Pull the taillight forward.
Disconnect the connector on the back of the light.
2. Changing the Bulbs
Turn the caps to unlock and pull the bulbs free.
3. Replacing the Tail Light
Reconnect the harness to the light.
Line the taillight up and push it into place.
Replace the two Phillips screws.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi I'm Mike Green, I'm one of the owners of 1A Auto. I want to help you save time and money preparing and maintaining your vehicle. I'm going to use my 20 plus years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
'99 to 04 Jeep Grand Cherokee taillights, pretty easy, just need a Phillips screwdriver and two screws there and down there. Headlight off the taillight almost wants to jump off now. Then I'm going to get it from the other side here, and the lights come out. See here there's a single connector. You can service the bulbs they just unlock.
They're a little difficult to turn but you can do it. I'm working back and forth and pull them out or service the whole bulb and service whole light, and you can see actually the screws go through there but then they go into these tabs here and that's what they actually hold onto it with, so this is just kind of a trim point.
Now, we want to connect everything back up, put that on. Lock that red tab and there is a little mounting ball lines up and goes right into there. You could see that ball goes right into there. That's in and that puts you back to this angle. Wrap that around. Screws going to go through. Whether you need to replace just the bulb or you want to replace the whole thing. That's how you do it.
We hope this helps you out. This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person. Thank you very much.
Tools used
Gloves
Phillips Head Screwdriver
Needle nose pliers
Safety Glasses
Pocket Screwdriver
CS139-U100L
In Stock
Product Reviews
Loading reviews
5.00/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Michael B.
November 2, 2009
Perfect match. The dealer wanted $160 Canadian plus tax. After shipping and duties I still saved over $75! Will buy from 1A again.
2000 Jeep Grand Cherokee Tail Light
J
September 1, 2017
After receiving the tail light, I reviewed the tail light installation video from 1A Auto and installed the new tail light with no problems. Everything fit and worked perfectly, I will purchase any future parts I might need from 1A Auto.
Replacement Tail Light
Mike
September 11, 2020
Perfect fit! Great value and an easy 10 minute project. Matches original. Hope the kids dont back into another tree and mess this one up!
Customer Q&A
Does this come with the 2 screws that are mentioned? I believe I'm missing one. If it doesn't, what do you think my best bet is to get another screw that'll work?September 10, 2015
Brandy D
2001 jeep grand cherokee brake light does not on drivers side when light are on?January 9, 2016
David E
10
Had the issue. Replaced the taillight and fixed the problem. But I would also replace the sockets for the bulbs. I did not get new sockets and had to replace those about 6 months later.
January 10, 2016
Douglas W
10
I'm not 100% sure what your question is, but I think you are trying to say when you turn the head lights on the brake light no longer works when you press the peddle. I had this problem as well, I replaced the bulb sockets, there are 3 in each light assembly, I also used dialectic grease on all the connections to make sure a good water tight connection was made and it fixed the problem.
January 10, 2016
Michael B
10
I had a bunch of issues with my taillights on my 2002 Jeep Grand Cherokee. The lights were cutting in and out and it was a bad connection on the bulb housing. A few people suggest lifting up the metal tabs for a better connection, using some gel for better electrical connectivity, or replacing the housing all together. I ended up burning a fuse out while I was messing around with my bulb housings so after replacing the taillight and two of my bulb housings I replaced the fuse and everything worked.
January 10, 2016
Thomas W
10
IT IS COMMON ON THESE MODELS FOR THE PRINTED CIRCUIT BOARD THAT THE BULBS PLUG INTO OR THE SOCKET THAT THE BULB PLUGS INTO. I'D BUY A NEW CIRCUIT BOARD
January 11, 2016
SIMPSON B
10
I would replace the bulb sockets. Thats how I corrected the same issue.
September 11, 2020
Mike F
2001 jeep grand cherokee brake light on drivers side does not work when headlights light are on?January 9, 2016
David E
10
I replaced the taillight assembly and put in new light sockets and all my lights worked properly after doing so,,
January 10, 2016
Brian G
10
Check the bulb.
March 9, 2017
Barry B
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Jeep is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Jeep or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.