Replaces

Jeep Grand Cherokee Tail Light & Socket Set - 1ALTP00584

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement Jeep Grand Cherokee Tail Light & Socket Set is just what you need to get your Jeep in good looking form again!

Specifications:

  • Includes:
    • (1) RH (Passenger Side) Tail light
    • (3) Tail light Bulb Sockets
  • 1/4 panel mounted
  • Replaces dealer part numbers: 55155138AH, 55155138AI, 4676589 (3)
  • Direct replacement
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Fits Grand Cherokee vehicles from production date of 11/01/02 to 2004
  • bulbs and wiring not included

*Note: For 2003 models you can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch piller that the door closes on.

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Jeep Grand Cherokee tail light with sockets make a great replacement and has good cost savings over the dealer units.

 

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Tail Light (0:36)
    • Remove the two Phillips screws from the tail light.
    • Pull the taillight forward.
    • Disconnect the connector on the back of the light.
  2. step : Changing the Bulbs (1:12)
    • Turn the caps to unlock and pull the bulbs free.
  3. step : Replacing the Tail Light (1:46)
    • Reconnect the harness to the light.
    • Line the taillight up and push it into place.
    • Replace the two Phillips screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Jeep Tailight
The taillight worked perfect. The quality of parts I have received is excellent. I will continue to buy all my parts from 1A Auto
February 19, 2017
Jeep Grand Cherokee tail light assembly
I ordered a passenger side tail light assembly and light socket set for my 2004 Jeep Grand Cherokee. I received it within three business days as promised. Everything was as I had come to expect from previous orders. The quality is no different from original equipment. Installation was exactly as the installation video showed. I will not hesitate to order from A1 again.
February 20, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
does it come with the circuit board ?
Robert J November 30, 2015
Hello and thank you for your inquiry. Yes this comes with the circuit board on the back of the tail light. It will also come with the sockets. Thank you and have a great day.
Derek C December 8, 2015
The tail lights I purchased for a Toyota Tacoma came with the wiring harness. All that was needed was to plug the unit into the connector in the chassis.
Wilbur M February 16, 2017
Year Make Model Description
2003Jeep Grand Cherokee Jeep Grand Cherokee (Built After 10/02 Production Date) Tail Light & Socket Set Passenger Side
2004Jeep Grand Cherokee Jeep Grand Cherokee Tail Light & Socket Set Passenger Side
Part #: 1ALTP00584


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:17 min)