Replaces

Jeep Grand Cherokee Liberty Front Driveshaft Rear CV Joint Rebuild Kit - 1ATRX00016

This CV Joint Repair Kit is just what you need to get your Jeep vehicle running great again! This kit includes the necessary parts to rebuild the rear joint of the front (propeller) shaft. If your experiencing drivetrain vibration and / or noise, then this rebuild kit may be for you!

Specifications:

  • Set Includes:
    • (1) Joint assembly
    • (1) shaft flange
    • (1) Dust cover
    • (6) Bolts
    • (1) C clip
    • (1) Boot
    • (1) Boot clamp
  • Replaces the REAR CV joint of the Front Driveshaft
  • Replaces many dealer part numbers including: 52105884AA, 52099498AD, 520994
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Driveshaft (0:43)
    • Remove the 8mm bolts from the front of the driveshaft
    • Break the front of the driveshaft free with a hammer and a flat blade screwdriver
    • Have an assistant hold the driveshaft, or brace it in place
    • Remove the 8mm bolts from the rear of the driveshaft
    • Break the rear of the driveshaft free with a hammer and a flat blade screwdriver
    • Pull out the driveshaft
  2. step : Removing the CV Joint (2:16)
    • Pry off the larger CV joint boot clamp clip with a hammer and screwdriver
    • Pry off the smaller CV joint boot clamp clip with a hammer and screwdriver
    • Cut off the boot with a razor blade
    • Pry the top off the CV joint with a flat blade screwdriver and a hammer
    • Pull off the CV joint housing
    • Clean the driveshaft with a cloth rag
    • Pull off the CV joint clip with snap ring pliers
    • Use a hammer to remove the CV joint from the driveshaft
  3. step : Constructing the New CV Joint (4:10)
    • Slide the new boot onto the driveshaft
    • Slide on the smaller boot clamp
    • Slide on the larger boot clamp
    • Slide on the bottom of the CV joint housing
    • Slide on the CV joint
    • Carefully hammer the CV joint into place
    • Insert the clip into the CV joint with the snap ring pliers
    • Apply grease to the CV joint
    • Thread the bolts through the top of the CV joint housing
    • Push the top into place, using the bolts to line it up
    • Hammer the CV joint housing together
    • Thread the bolts out of the CV joint
    • Tighten the boot clamps with a pair of pliers
    • Bend the clamps into their clips
    • Cut off the extra material with wire cutters
  4. step : Reinstalling the Driveshaft (7:01)
    • Feed the driveshaft into place
    • Push the front of the driveshaft into place
    • Push the rear of the driveshaft into place
    • Have an assistant hold the wheel, or brace the wheel, to keep the driveshaft from turning
    • Insert the 6mm Allen bolts at the front of the driveshaft
    • Tighten the 6mm Allen bolts to between 12 - 14 foot-pounds of torque
    • Insert the 8mm bolts at the rear of the driveshaft

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Razor Blade / Gasket Scraper
  • Assistant

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters
  • Slip-Joint Pliers
  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

4.0 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
2
2
0
0
Fast delivery and easy install
1aauto delivered this part in two business days. My 14 year old son and I dropped the front driveshaft, replaced the rear cv and reinstalled in 2 hours. It was really quite easy to do! My local shop quoted $600 to replace with new driveshaft because apparently a cv can't be rebuilt. Thanks to 1a for a great price on this rebuild kit ($56) and YouTube for great how to videos.
August 5, 2016
Drive Shaft CV joint
Right part, fast delivery...Awesome service, love these guys
August 21, 2017
Purchased
8 months ago
2006 Jeep Liberty
Overall I was happy with this kit, my one complaint is that the new split ring was too large. However, the old one I had was in fine condition which made it a non issue.
March 18, 2017
Purchased
1 year ago
Description
I own a 2004 grand cherokee, it worked. I might go some place else next time this is the second thing I ordered from this site that was not correct.
June 5, 2017
Purchased
12 months ago
Good part but did not fit perfectly
Good part and it fixed the problem however I had to modify it slightly to get the snap ring to fit on the shaft. Had to grind the backside of the CV joint surface to get the snap ring to seat. And also the snap ring that was provided was to big. Had to use the old one
March 19, 2017
Purchased
1 year ago
It works
It fits my 04 jeep Grand Cherokee. Way easier to rebuild my c.f. joint than expected. My only complaint about this is that the fouls that came with it do not fit my jeep at all. Other than that good product.
July 18, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2006 Jeep Grand Cherokee Front Driveshaft Rear CV Joint Rebuild Kit
  • 2002-2007 Jeep Liberty Front Driveshaft Rear CV Joint Rebuild Kit

This part replaces:

  • OE # 52105884AA
  • OE # 52099498AD
  • OE # 520994
  • Hollander 430-00471
  • Dorman 932-301
Part #: 1ATRX00016

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(08:51 min)