Replaces

Jeep Grand Cherokee Liberty Front Driveshaft Front CV Joint Rebuild Kit - 1ATRX00019

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This CV Joint Repair Kit is just what you need to get your Jeep vehicle running great again! This kit includes the necessary parts to rebuild the front joint of the front (propeller) shaft. If your experiencing drivetrain vibration and / or noise, then this rebuild kit may be for you!

Specifications:

  • Set Includes:
    • (1) Joint assembly
    • (1) Shaft flange
    • (1) Flange gasket
    • (1) Dust cover
    • (6) Bolts
    • (1) C clip
    • (2) Boot
    • (2) Boot clamps
  • Replaces the FRONT CV joint of the Front Driveshaft
  • Replaces many dealer part numbers including: 52099497AD, 52099498AD, 52105884AA, 52111591AB, 52111593AB, 52111594AA, 52111596AB, 52853299AB
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Driveshaft (0:43)
    • Remove the 8mm bolts from the front of the driveshaft
    • Break the front of the driveshaft free with a hammer and a flat blade screwdriver
    • Have an assistant hold the driveshaft, or brace it in place
    • Remove the 8mm bolts from the rear of the driveshaft
    • Break the rear of the driveshaft free with a hammer and a flat blade screwdriver
    • Pull out the driveshaft
  2. step : Removing the CV Joint (2:16)
    • Pry off the larger CV joint boot clamp clip with a hammer and screwdriver
    • Pry off the smaller CV joint boot clamp clip with a hammer and screwdriver
    • Cut off the boot with a razor blade
    • Pry the top off the CV joint with a flat blade screwdriver and a hammer
    • Pull off the CV joint housing
    • Clean the driveshaft with a cloth rag
    • Pull off the CV joint clip with snap ring pliers
    • Use a hammer to remove the CV joint from the driveshaft
  3. step : Constructing the New CV Joint (4:10)
    • Slide the new boot onto the driveshaft
    • Slide on the smaller boot clamp
    • Slide on the larger boot clamp
    • Slide on the bottom of the CV joint housing
    • Slide on the CV joint
    • Carefully hammer the CV joint into place
    • Insert the clip into the CV joint with the snap ring pliers
    • Apply grease to the CV joint
    • Thread the bolts through the top of the CV joint housing
    • Push the top into place, using the bolts to line it up
    • Hammer the CV joint housing together
    • Thread the bolts out of the CV joint
    • Tighten the boot clamps with a pair of pliers
    • Bend the clamps into their clips
    • Cut off the extra material with wire cutters
  4. step : Reinstalling the Driveshaft (7:01)
    • Feed the driveshaft into place
    • Push the front of the driveshaft into place
    • Push the rear of the driveshaft into place
    • Have an assistant hold the wheel, or brace the wheel, to keep the driveshaft from turning
    • Insert the 6mm Allen bolts at the front of the driveshaft
    • Tighten the 6mm Allen bolts to between 12 - 14 foot-pounds of torque
    • Insert the 8mm bolts at the rear of the driveshaft

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Razor Blade / Gasket Scraper
  • Assistant

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters
  • Slip-Joint Pliers
  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2004Jeep Grand Cherokee Jeep Grand Cherokee Front Driveshaft Front CV Joint Rebuild Kit for Models with QUADRA-DRIVE 4WD System (Full Time 4WD)
2002-2007Jeep Liberty Jeep Liberty Front Driveshaft Front CV Joint Rebuild Kit
Part #: 1ATRX00019


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:51 min)