Replaces

Jeep Grand Cherokee Liberty Front Driveshaft CV Joint Rebuild Kit - 1ADMK00011

This CV Joint Repair Kit is just what you need to get your vehicle running great again!  If your experiencing drivetrain vibration and / or noise, then this rebuild kit may be for you!

Specifications:

  • Replaces the FRONT & REAR CV joints of the FRONT Driveshaft
  • Set Includes:
    • (2) Joint assemblies
    • (2) Shaft flanges
    • (1) Flange gasket
    • (2) Dust covers
    • (12) Bolts
    • (2) C clips
    • (3) Boots
    • (3) Boot clamps
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Driveshaft (0:43)
    • Remove the 8mm bolts from the front of the driveshaft
    • Break the front of the driveshaft free with a hammer and a flat blade screwdriver
    • Have an assistant hold the driveshaft, or brace it in place
    • Remove the 8mm bolts from the rear of the driveshaft
    • Break the rear of the driveshaft free with a hammer and a flat blade screwdriver
    • Pull out the driveshaft
  2. step : Removing the CV Joint (2:16)
    • Pry off the larger CV joint boot clamp clip with a hammer and screwdriver
    • Pry off the smaller CV joint boot clamp clip with a hammer and screwdriver
    • Cut off the boot with a razor blade
    • Pry the top off the CV joint with a flat blade screwdriver and a hammer
    • Pull off the CV joint housing
    • Clean the driveshaft with a cloth rag
    • Pull off the CV joint clip with snap ring pliers
    • Use a hammer to remove the CV joint from the driveshaft
  3. step : Constructing the New CV Joint (4:10)
    • Slide the new boot onto the driveshaft
    • Slide on the smaller boot clamp
    • Slide on the larger boot clamp
    • Slide on the bottom of the CV joint housing
    • Slide on the CV joint
    • Carefully hammer the CV joint into place
    • Insert the clip into the CV joint with the snap ring pliers
    • Apply grease to the CV joint
    • Thread the bolts through the top of the CV joint housing
    • Push the top into place, using the bolts to line it up
    • Hammer the CV joint housing together
    • Thread the bolts out of the CV joint
    • Tighten the boot clamps with a pair of pliers
    • Bend the clamps into their clips
    • Cut off the extra material with wire cutters
  4. step : Reinstalling the Driveshaft (7:01)
    • Feed the driveshaft into place
    • Push the front of the driveshaft into place
    • Push the rear of the driveshaft into place
    • Have an assistant hold the wheel, or brace the wheel, to keep the driveshaft from turning
    • Insert the 6mm Allen bolts at the front of the driveshaft
    • Tighten the 6mm Allen bolts to between 12 - 14 foot-pounds of torque
    • Insert the 8mm bolts at the rear of the driveshaft

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Razor Blade / Gasket Scraper
  • Assistant

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters
  • Slip-Joint Pliers
  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

4.3 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
1
0
0
propellor shaft rebuild kit
product arrived on time, was as advertised and everything worked except the circlip retainer was the wrong size had to use the old one
January 22, 2017
Purchased
1 year ago
Good, but not pefect
Both snap rings were the wrong size so I had to go buy new ones. The front cv joint was 1-2 mm too long so I had to use dremel tool to scribe new groove to get to fit properly. Also, I decided to reuse old bolts because New bolts were much softer metal. Took 4hrs longer to swap out parts due to difference in original parts and replacement parts. But seems to be economicall option if you have time and deep toolbox.
February 9, 2017
Purchased
1 year ago
Liberty rebuild kit
This kit is a great way to save bucks on your Liberty when a CV goes bad on the intermediate shaft. The dealership only sells the shaft as a complete unit and says the cv joints are not serviceable. I ordered the kit and it came quickly.

Only my rear joint was bad. It went together like a dream. When I went to change the front joint, something was amiss with the kit I received. a quick email to 1aAuto and a replacement kit was on the way.

I installed the replacement a few days later and the Jeep is back on the road!

Thanks 1aAuto.com for a great deal on these parts!
December 19, 2017
Purchased
2 months ago
2003 Jeep Liberty.
The parts were a direct replacement and have not had any issues!
January 10, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:51 min)

Tools List:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Razor Blade / Gasket Scraper
  • Assistant

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters
  • Slip-Joint Pliers
  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket



This part replaces:

  • Hollander 430-0444
  • Dorman 932-301, 932-302
  • OE # 52105884AA
  • OE # 52099498AD
  • OE # 52099497AD
  • OE # 52111591AB
  • OE # 52111593AB
  • OE # 52111594AA
  • OE # 52111596AB
  • OE # 52853299AB
  • OE # 520994

Vehicle Fit

  • 1999-2004 Jeep Grand Cherokee Front Driveshaft CV Joint Rebuild Kit for Models with QUADRA-DRIVE 4WD System (Full Time 4WD)
  • 2002-2007 Jeep Liberty Front Driveshaft CV Joint Rebuild Kit
Part #: 1ADMK00011

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More