Replaces

Jeep Grand Cherokee Grand Wagoneer Front Wheel Hub Bearing & Axle Kit 4 Piece Set TRQ - 1AAHK00013

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   4 Piece Set

Specifications

  • Brand New Wheel Bearing & CV Axle Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

 

 

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:51)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Straighten the cotter pin on the axle nut with needle nose pliers
    • Remove the cap and washer from the axle nut
    • Loosen the axle nut with a 36mm socket and breaker bar
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Rotor (2:18)
    • Remove 13mm bolts from the brake caliper
    • Pull the caliper aside and secure it out of the way with a bungee chord
    • Pull the rotor off
  3. step : Removing the Hub (3:10)
    • Spray rust penetrant around the contact points of the hub
    • Remove the three 13mm 12-point bolts from the hub
    • Pry off the washer from the axle (if you have one) with a pick
    • Tap the axle in with a hammer to free the splines from the hub
    • Tap the hub out of the spindle with a hammer
    • Remove the hub and dust shield
  4. step : Installing the Hub (5:55)
    • Insert the dust shield into place
    • Insert the hub into place
    • Tighten the 12-point 13mm bolts
    • Torque the hub bolts to 75 foot-pounds
  5. step : Installing the Rotor (6:49)
    • Insert the rotor onto the hub
    • Press the caliper onto the rotor
    • Tighten the two 13mm bolts to the caliper
    • Torque the caliper mounting bolts to 20 foot-pounds
  6. step : Reattaching the Wheel (7:28)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Torque the axle nut to 175 foot-pounds
    • Insert the axle nut cap into place
    • Insert a new cotter pin into place
    • Turn each end of the cotter pin to opposite sides of the nut

Tools needed for replacement:

    General Tools

  • Hammer
  • Pick

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 36mm Socket

5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Hub and axle shifts
They fit perfectly and the quality of the parts were great and with the help of the tec when i was buying them the job when flawlessly
October 27, 2017
Perfect fit
Phenomenal pricing! Both the cost of the parts and especially the cost of shipping to Alaska! Very happy with the overall purchase and will definitely be a repeat customer.
April 24, 2018
Fast
Fast shipping, perfect fit. Will be doing business agian. Thank you A-1
May 7, 2018
Great Service
I found to have great customer service and fast delivery. The parts are what were ordered. We will definitely recommend this company to friends. Thank you for everything.
October 23, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
how do i know if i have cv joint style axles ?
CHASE D November 8, 2018
You could always call your dealership with your VIN and they may be able to check for you.
Emma F November 9, 2018
How do I know if the cv joints in the kit are for 4wd?
Christian V January 15, 2019
This is able to fit for both 2 wheel drive and 4 wheel drive.
Emma F January 15, 2019
You wouldnt have front axles if it wasnt 4 wheel drive. I bought the kit and everything fit perfect. I highly recommend it
M I January 15, 2019
Are not all jeeps 4 wheel drive?
O R January 16, 2019
If youre buying this kit its for a dana 30 front drive axle on a 4wd jeep. Mine is a 98 grand cherokee. They are factory replacement units. Im currently running 32" diameter tires with no issues.
K R January 16, 2019
Are they chromeoly?
Jeramyka R March 20, 2019
The actually materials of these parts are not available. Our parts are exact replacements for your vehicles OEM parts and have a lifetime warranty. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
Tim K March 20, 2019
How are these kits different BHA52930 & PSA58834?
Gary B October 5, 2019
Hey Gary, PSA58834 is the same kit but it will have ball joints. The other kit does not have them. If you have any other questions feel free to contact us and have a great day! Thank you, Corey
Corey M October 5, 2019
Year Make Model Description
1993-1998Jeep Grand Cherokee Jeep Grand Cherokee CV Joint Style Axles Front Wheel Hub Bearing & Axle Kit 4 Piece Set
1993Jeep Grand Wagoneer Jeep Grand Wagoneer CV Joint Style Axles Front Wheel Hub Bearing & Axle Kit 4 Piece Set
Part 1AAHK00013
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA52930