Replaces

Jeep Grand Cherokee Brake Pads Nakamoto CD790 - 1ABPS00246

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

This front disc brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Direct replacement
  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • Correct for models with Teves Calipers
    • See attached picture for caliper reference

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:19)
    • Loosen the lug nut covers with a 19mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:43)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 1bolts from the brake caliper with an 11/16 socket
    • Pull the caliper aside
    • Pry out the pins from the brake pads
    • Pry the brake pads off with a flat blade screwdriver
    • Unclip the ABS sensor wiring harness
    • Remove 3/4 inch bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips screws from the rotor
    • Pull the rotor off
    • If the rotor will not pull off, thread some bolts into the slot on the rotor, and tighten them to loosen the rotor
  3. step : Installing the New Brake Rotor and Brake Pads (5:48)
    • Clean off the hub with a wire brush
    • Slide the rotor on
    • Clean both sides of the rotor with brakes parts cleaner
    • Thread on one lug nut to hold the rotor in place
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply grease to the caliper slide bolts
    • Clean the caliper bracket and brake pad slides with a wire brush
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 85 foot-pounds of torque
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Secure the caliper slide pin with locking pliers
    • Tighten bolts to 20 foot-pounds
    • Remove the lug nut
  4. step : Reattaching the Wheel (10:53)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  5. step : Testing the Brakes (11:18)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - SAE

  • 3/4 Inch Socket
  • 11/16 Inch Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2001Jeep Grand Cherokee Jeep Grand Cherokee Front Premium Posi Ceramic Brake Pads for Models with Teves Calipers Nakamoto
2002Jeep Grand Cherokee Jeep Grand Cherokee Front Premium Posi Ceramic Brake Pads for Models with Teves Calipers (Built Before 5/11/02 Production Date) Nakamoto
Part #: 1ABPS00246


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD790

How-to Video:

(11:50 min)