Replaces

Jeep Grand Cherokee Brake Kit Nakamoto MD790, MD791, 5118, 52098666 - 1ABFS01442

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Front Brake Rotor Specifications:
    12.01" (305mm)
    Vented
    5 Lug
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes:
    (1) Rear Semi-Metallic Brake Pad Set
    (1) Front Semi-Metallic Brake Pad Set
    (2) Front Replacement Brake Rotors
    (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Specifications:
    Solid
    12.01" (305mm)
    5 Lug
  • Brake Pad Features & Benefits:
    OE Grade Multi-Layer Shim
    Positive Mold Technology
    Environmentally Compliant

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • 8 Piece FRONT & REAR Brake Pad Set
  • Includes shims
  • Direct replacements
  • Professional Grade SEMI-METALLIC Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: 12062056, 18021354, 19152703, 25956847, 88965647
  • Fit 5 Stud Wheels
  • FRONT - 10.94" Diameter Vented Rotors
  • REAR - 10.94" Diameter Solid (not Vented) Rotors

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:19)
    • Loosen the lug nut covers with a 19mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:43)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 1bolts from the brake caliper with an 11/16 socket
    • Pull the caliper aside
    • Pry out the pins from the brake pads
    • Pry the brake pads off with a flat blade screwdriver
    • Unclip the ABS sensor wiring harness
    • Remove 3/4 inch bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips screws from the rotor
    • Pull the rotor off
    • If the rotor will not pull off, thread some bolts into the slot on the rotor, and tighten them to loosen the rotor
  3. step : Installing the New Brake Rotor and Brake Pads (5:48)
    • Clean off the hub with a wire brush
    • Slide the rotor on
    • Clean both sides of the rotor with brakes parts cleaner
    • Thread on one lug nut to hold the rotor in place
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply grease to the caliper slide bolts
    • Clean the caliper bracket and brake pad slides with a wire brush
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 85 foot-pounds of torque
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Secure the caliper slide pin with locking pliers
    • Tighten bolts to 20 foot-pounds
    • Remove the lug nut
  4. step : Reattaching the Wheel (10:53)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  5. step : Testing the Brakes (11:18)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - SAE

  • 3/4 Inch Socket
  • 11/16 Inch Socket

4.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
1
0
Good value fast shipping. Would order again. Little bit of squeaking here and there but I think that's from installation error nothing. Horrible
October 29, 2017
Purchased
1 year ago
Didn't get all of the parts
So, I ordered these and only got half the kit. Yes, they work well, but if I'm paying the price, I'd at least like to have all the pieces to it..
July 23, 2017
Purchased
1 year ago
Response from 1A Auto
Please contact us at 1-888-844-3393 to resolve this matter. We would be more than happy to assist.
July 24, 2017
Alex P Staff
Happy
Very happy all the way around everything went right on with out a probem
March 17, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
Does kit include calipers and do they come with new brackets?
Patrick on Jun 21, 2017
BEST ANSWER: The kit just comes with the pictured items, rotors and pads. They were a good buy, and were of OEM quality

Vehicle Fit

Year Make Model Description
1999-2001Jeep Grand Cherokee Jeep Grand Cherokee Front & Rear Premium Posi Semi-Metallic Brake Kit for Models with Teves Calipers Nakamoto
2002Jeep Grand Cherokee Jeep Grand Cherokee Front & Rear Premium Posi Semi-Metallic Brake Kit for Models with Teves Calipers (Built Before 5/11/02 Production Date) Nakamoto

This part replaces:

  • Nakamoto MD790, MD791, 5118, 52098666
Part #: 1ABFS01442


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: MD790, MD791, 5118, 52098666

How-to Video:

(11:50 min)