Replaces

Jeep Grand Cherokee Brake Kit Nakamoto CD791, CD945, 5118, 52098666 - 1ABFS02200

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Front Brake Rotor Specifications:
      12.01" (305mm)
      Vented
      5 Lug
  • Brake Pad Friction Material:   Ceramic
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (1) Rear Ceramic Brake Pad Set
      (2) Front Replacement Brake Rotors
      (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Specifications:
      Solid
      12.01" (305mm)
      5 Lug
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

Specifications:

  • Professional Grade Ceramic Disc Brake Pads
  • 8 Piece Front & Rear brake pad set
  • Direct replacement

Specifications:

  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 5 Stud Wheel

 

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:19)
    • Loosen the lug nut covers with a 19mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:43)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 1bolts from the brake caliper with an 11/16 socket
    • Pull the caliper aside
    • Pry out the pins from the brake pads
    • Pry the brake pads off with a flat blade screwdriver
    • Unclip the ABS sensor wiring harness
    • Remove 3/4 inch bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips screws from the rotor
    • Pull the rotor off
    • If the rotor will not pull off, thread some bolts into the slot on the rotor, and tighten them to loosen the rotor
  3. step : Installing the New Brake Rotor and Brake Pads (5:48)
    • Clean off the hub with a wire brush
    • Slide the rotor on
    • Clean both sides of the rotor with brakes parts cleaner
    • Thread on one lug nut to hold the rotor in place
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply grease to the caliper slide bolts
    • Clean the caliper bracket and brake pad slides with a wire brush
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 85 foot-pounds of torque
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Secure the caliper slide pin with locking pliers
    • Tighten bolts to 20 foot-pounds
    • Remove the lug nut
  4. step : Reattaching the Wheel (10:53)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  5. step : Testing the Brakes (11:18)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - SAE

  • 3/4 Inch Socket
  • 11/16 Inch Socket

4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Easy Install
We got the parts ordered ahead of schedule. Parts were easy to install and the right fit. Thanks again for quality parts.
July 1, 2017
i got this for my 99 grand cherokee, however, the center is not painted so, if you dont want it to rust. you should paint it first before installing. 2 k miles so far so good.
March 31, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2002Jeep Grand Cherokee Jeep Grand Cherokee Front & Rear Premium Posi Ceramic Brake Kit for Models with Akebono Calipers Nakamoto
2003-2004Jeep Grand Cherokee Jeep Grand Cherokee Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
Part #: 1ABFS02200


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD791, CD945, 5118, 52098666

How-to Video:

(11:50 min)