Jeep CV Axle Shaft Front Pair TRQ CSA82472 - 1AACS00025

Warranty & Shipping
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Front
  • Location:   Outer


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • LH (Driver Side) - 22 3/4" Long
  • RH (Passenger Side) - 38" Long - 27 Inner and Outer Splines
  • Fit models that use the CV Joint style axle shaft
    • Do not fit models with U-joint style front axle

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Good Axle Shafts
I bought these axle shafts because I replaced my front differential and these allowed me to keep my ABS system. I ordered my front diff from ECGS with a welded on truss, axle sleeves, axle seals, and C-Gussets. These shafts still fit. The right one went in easily. The left one took some massaging. My instinct was to force it in; but, then I realized the rubber boot was hanging up with the metal band; so, I backed it out and took care of the rubber boot as I brought it in. I even made a video torquing the left axle shaft. These axle shafts work so well, I have already recommended them to another Jeep friend.
December 29, 2017
Great part
It got here on time and was the right part that I needed and the installation was easy and just as it was spost to be. Every thing was just perfect. I will be ordering the 1a auto again. Thank you
May 4, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I have a 97 grand cherokee tsi, would these fit? It is all time 4 wheel with a 8cyl engine.
Tina B June 21, 2017
As long as you do not have U-joint style axles, these will fit your 1997 Grand Cherokee!
Tim K June 21, 2017
They should fit.
Kurt A June 21, 2017
Sorry dont know My jeep is a 96 straight 6 Your 8 cylinder might be heavier duty axle
Kenneth J June 22, 2017
My car is 96 Grabd Cherokee V8 with all wheel quadtrack. I bought axles, hubs and beari ngs. By accident I initially bought just hubs and bearings , thinking axles were included. When they arrived and recognizing my error I ordered axles too. In a few days the axles arrived and easy assembly followed. Works like its supposed too. Next I am ordering a complete set of bushings and whatever else is needed to finish rebuilding the steering. Prices are very good and the free shipping is also a nice feature 3-4 days. It is was my f8rst dealings with 1A auto and they are now my official provider.
J K June 23, 2017
Would these axles fit my 96 xj? I have ujoint axles from a grand in it right now, thanks
Phillip W April 6, 2018
I have a 95 Grand Cherokee and everything fit right in I’m not to sure about your 96 xj
C H April 6, 2018
These axles are for a Dana 30 - 27 Splines. Most grands, prior to 96 came with Dana 25s and 96 some grands started coming out with Dana 30s. In fact, Im finding that in 95 1/2 is when they made the switch. It looks like prior to that, they were using U-Joint style axles; so, if you have cv axles, youre close. Im finding that some Dana 30s came with optional 30 spline axles; so, from what I can tell, if you count your splines and find that you have 27 splines; then, yes, this will fit your Jeep. If you have 30 spline axles; then, this is not for you. There are videos of guys upgrading to 30 splines; but, several things of caution, axles are much easier and cheaper to replace then carriers. On the trail, guys replace axles; but, no one replaces carriers, in fact, there are horror-story videos of guys having to remove their front drive shafts and both front axles, just to get home; and, they couldve avoided that by keeping with 27 spline axles. When Dana upgraded some axles to 30 splines, they also upgraded the pinion and carrier. Think of the axles as a fuse. You want the axles to fail before the carrier or pinion; so, if you have 27 spline axles, stick with them; and, these are the axles for you. Happy Trails!
S T April 7, 2018
Year Make Model Description
1993-1998Jeep Grand Cherokee Jeep Grand Cherokee Front Outer CV Axle Shaft Pair TRQ CSA82472
1993Jeep Grand Wagoneer Jeep Grand Wagoneer Front Outer CV Axle Shaft Pair TRQ CSA82472
Part #: 1AACS00025

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: CSA82472