This replacement Jeep corner parking light is just what you need to get your Jeep in good looking form again!


  • RH (Passenger Side)
  • Injection molded plastic
  • DOT (Department of Transportation) & (Society of Automotive Engineers) approved
  • Direct replacement
  • Mounts to the side of the headlight
  • Does not include bulbs or wiring

This Jeep corner parking lamp is a great replacement and has good cost savings over a parking light from the dealer.


Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Side Marker Light (0:53)
    • Loosen the lower T2 Torx screw from the side marker light
    • Remove the lower T2 screw from the marker light
    • Pull out the marker light
  2. step : Servicing the Side Marker Light Bulb (2:08)
    • Twist the bulb out of the side marker light
    • Disconnect the bulb from the socket
    • Connect the new bulb
    • Twist the bulb into place
  3. step : Installing the New Side Marker Light (2:20)
    • Push the marker light into place
    • Insert the lower T2 screw into the marker light
    • Insert the top T2 screw into the marker light

Tools needed for replacement:

    Torx Drivers & Sockets

  • Number 2 Torx driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1993-1998Jeep Grand Cherokee Jeep Grand Cherokee Corner Light Passenger Side
1993Jeep Grand Wagoneer Jeep Grand Wagoneer Corner Light Passenger Side

This part replaces:

  • Partslink CH2521121
  • Hollander 116-1098R
  • TYC 18-3117-01
  • DEPO 333-1508R-US
  • OE # 56005104
Part #: 1ALPK00121

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:17 min)