Replaces

Intermediate Steering Shaft Dorman 425-361 - 1ASTC00153

This replacement steering shaft with coupler is just what you need to get your vehicle in good working condition again!

Often on the original steering shaft coupler the joint wears out. At first it will usually just make a clicking, or ticking noise. If not replaced over time it can cause not only a loose steering feel, but a dangerous safety concern if the joint separates.

Specifications:

  • Intermediate Steering Shaft with Coupler
  • Direct replacement
  • Built to strict quality control standards
NOTE: This part is an updated design. It may appear different than the original factory design, but it is made to fit and function the same as the original part.

This steering shaft is a great replacement part and provides a good cost savings over the price of a dealer part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Intermediate Steering Shaft (0:56)
    • Remove the 13mm bolt from the bottom of the intermediate steering shaft
    • Remove the 13mm bolt from the top of the steering shaft
    • Tap the steering shaft loose with a hammer
    • Pry the steering shaft loose with a flat blade screwdriver and a hammer
    • Pull out the steering shaft
  2. step : Installing the New Steering Shaft (3:37)
    • Loosen the steering shaft adjustment bolt with a 2.5mm Allen wrench
    • Telescope the steering shaft out
    • Tighten the 2.5mm Allen bolt so that the shaft can still telescope
    • Maneuver the steering shaft into place
    • Push the top of the steering shaft onto the steering linkage
    • Insert the 13mm bolt into the top of the steering shaft
    • Turn the wheels to access the steering shaft
    • Push the steering shaft onto the steering rack
    • Insert the 13mm bolt into the bottom of the steering shaft

Tools needed for replacement:

    Allen Wrenches

  • 2.5mm Allen Wrench

  • General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Swivel

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Intermediate shaft
Very nice piece! The quality is second to none. Installation wasn't too bad. I'm very satisfied with this part.
April 30, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
Does it have grease fittings?
Lora K on Jan 6, 2016
BEST ANSWER: There are no grease fittings, but a nice product at reasonable price.

Vehicle Fit

  • 2004 Ford F150 Truck New Body Style Intermediate Steering Shaft with Coupler Dorman 425-361
  • 2005-2008 Ford F150 Truck Intermediate Steering Shaft with Coupler Dorman 425-361
  • 2006-2008 Lincoln Mark LT Intermediate Steering Shaft with Coupler Dorman 425-361

This part replaces:

  • OE # 8L3Z3B676B
  • Dorman 425-361
Only 1 left in stock
Part #: 1ASTC00153

Ships Same Day for orders placed by 4 P.M. ET

Dorman
Brand #: 425-361

How-to Video:

(05:43 min)