This replacement Mitsubishi Eclipse interior door handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH Driver Side
  • Injected molded plastic
  • Black textured finish
  • Includes lock button
  • Replaces dealer part number: MR473719
  • Direct replacement for original interior door handle

This interior door handle is a direct bolt on and is built to strict quality control standards.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:30)
    • Pry off the trim piece inside the door pull with a flat blade screwdriver
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the three Phillips screws at the bottom of the door panel
    • Remove the Phillips head screw at the back corner of the door panel
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Disconnect the door lock wiring harness
    • Disconnect the door lock rod from the door handle
    • Disconnect the window switch wiring harnesses
    • Carefully peel off the water shield
  2. step : Removing the Interior Door Handle (2:52)
    • Remove the two T20 screws from the door handle
    • Remove the door handle
    • Pry off the door lock switch with a flat blade screwdriver
  3. step : Reinstalling the Interior Door Handle (3:41)
    • Insert the switch into the door handle
    • Insert the door handle into the door
    • Tighten the two T20 screws to the door handle
  4. step : Reinstalling the Door Panel (4:20)
    • Connect the door lock wiring harness
    • Connect the window switch wiring harnesses
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips head screw to the back corner of the door panel
    • Insert the three Phillips screws to the bottom of the door panel
    • Push on the trim piece inside the door pull
    • Push on the trim piece inside the door handle

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2005Chrysler Sebring Chrysler Sebring 2 Door Coupe Black Interior Door Handle Driver Side
2003-2005Dodge Stratus Dodge Stratus 2 Door Coupe Black Interior Door Handle Driver Side
2000-2005Mitsubishi Eclipse Mitsubishi Eclipse Black Interior Door Handle Driver Side

This part replaces:

  • Dorman 83719
  • OE # MR473719
Part #: 1ADHI00192


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:34 min)