Replaces

Infiniti I35 Nissan Maxima Strut & Spring Assembly - 1ASTS00806

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the top of the strut (1:25)
    • Pop the trunk and move the carpeting out of the way
    • Pry up the clip securing the trunk trim and pull it up.
    • Unbolt the 14 mm bolts at the top of the strut.
  2. step : Remove the wheel (2:15)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  3. step : Remove the bottom of the strut (2:30)
    • Use a breaker bar and penetrating oil to unbolt the 17 mm strut bolts on the bottom
    • Pull the strut down and out.
  4. step : Install the new strut (3:40)
    • Bolt the strut back in, torquing your 14 mm bolts to 20-30 ft lbs
    • Insert your spindle to the lower end of the strut and raise your control arm until the bolt holes line up.
    • Torque the bottom 17 mm nut to 75 ft lbs
  5. step : Replace the wheel (5:47)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs

Tools needed for replacement:

    Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 21mm Socket
  • 17mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:05 min)

Tools List:

    Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 21mm Socket
  • 17mm Socket



This part replaces:

  • Monroe 171327
  • Monroe 181327

Vehicle Fit

  • 2002-2004 Infiniti I35 Rear Strut & Spring Assembly Driver or Passenger Side without Electronic Suspension
  • 2002-2003 Nissan Maxima Rear Strut & Spring Assembly Driver or Passenger Side without Electronic Suspension
Only 1 left in stock
Part #: 1ASTS00806

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More