Replaces

Infiniti I35 Nissan Maxima Strut & Spring Assembly - 1ASSP01597

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:07)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut (1:27)
    • Hold the strut spindle bolt with a 19mm wrench
    • Remove the strut spindle nut with a 21mm socket and ratchet
    • Pull the bolt out of the spindle
    • Push the ABS sensor out of its brackets
    • Remove the brake line clip with needle nose pliers
    • Pull the brake line out of its bracket
    • Pry the strut out of the wheel spindle with a flat blade screwdriver
    • Apply penetrating oil to the strut mount nuts
    • Remove two of the three 14mm nuts from the strut mount
    • Support the strut as you remove the remaining 14mm nut
    • Pull the strut out
  3. step : Installing the New Strut (3:50)
    • Align the strut mount using a screwdriver so that the F faces forward
    • Push the strut into place
    • Support the strut as you start the 14mm nuts onto the strut mount
    • Push the strut into the spindle
    • Bush the bolt through the spindle
    • Start the nut onto the spindle bolt
    • Tighten the strut mount nuts to 25 foot-pounds of torque
    • Tighten the spindle nut to 110 foot-pounds
    • Push the ABS sensor back into its brackets
    • Push the brake line into its bracket
    • Put the brake line clip on
    • Tap the clip on with a hammer
  4. step : Reattaching the Wheel (6:38)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Have your car professionally aligned following this repair

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 19mm Wrench

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Work great!
These parts fit my 02 Infiniti I35 just fine. The installation instructions generally pretty good for the front structs. There wasnt as much information for the rear struts, but it wasnt too hard to figure out what to do. I did end up needing to use a spring compressor on the rear struts in order to rotate the top into the right position. I tried just using a big screw driver to rotate the top, but there was too much friction from the rubber bumper.
April 10, 2018
Complete Strut Assemblies
First let me start off by saying I am NOT a professional. I like things simple; my coffee black, my scotch older and my cars faster. This is not my first time purchasing from 1A, but my first review so here it is: Using these was one of the better choices I have made. Watching the 1A Auto video that goes with the struts, the tools listed and a mere 4 hours later I had the struts, sway bar links and sway bar bushings installed and my Maxima back on the ground. It was really that easy. One piece of advice though: if the bolts line up in their top holes and the bottom doesn’t line up with the knuckle take a large screwdriver and rotate the bottom of the strut so it will line up. It may make a few loud popping noises, but you’ll be fine.
June 7, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Who is the manufacturer of the struts?
David H May 22, 2018
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Tim K May 22, 2018
Are they made in the USA? Im from Canada and dont want to pay duty
Edmond F June 22, 2018
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. As the items will be shipping from our warehouse in the US, there will be duty fees on top of the shipping cost to Canada. If you have any further questions, please dont hesitate to ask.
Jessica D June 22, 2018
Year Make Model Description
2002-2004Infiniti I35 Infiniti I35 without Electronic Suspension Front & Rear Strut & Spring Assembly 4 Piece Set
2002-2003Nissan Maxima Nissan Maxima Front & Rear Strut & Spring Assembly 4 Piece Set
Part #: 1ASSP01597


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:17 min)