Replaces

Infiniti I30 Nissan Maxima Steering & Suspension Kit - 1ASFK03018

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a Set of 12
  • Direct replacements
  • Built to strict quality control standards

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:55)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:15)
    • Measure the distance from the end of the boot to the center of the top of the tie rod
    • Note that measurement
    • Apply penetrating oil to the tie rod lock nut
    • Hold the inner tie rod with a 13mm wrench
    • Loosen the locking nut with an adjustable wrench
    • Turn the wheel by hand or with the steering wheel for better access to the tie rod
    • Remove the cotter pin with needle nose pliers
    • If you cannot remove the cotter pin, sheer it off by removing the 19mm bolt
    • Remove the 19mm bolt
    • Loosen the tie rod from the spindle by striking the spindle with a hammer
    • Pull the outer tie rod out of the handle
    • Hold the inner tie rod with a 13mm wrench
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (3:52)
    • Apply anti-seize grease to the inner tie rod
    • Hold the inner tie rod with a 13mm wrench
    • Twist the outer tie rod on by hand
    • Measure the distance from the end of the boot to the center of the top of the tie rod
    • This should equal the measurement recorded in Step 2
    • Push the outer tie rod into the spindle
    • Start the tie rod nut by hand
    • Tighten the nut to 55 foot-pounds of torque
    • Line the tie rod hole up with one of the slots in the nut
    • Insert the cotter pin and bend it to lock it
    • Hold the inner tie rod with a 13mm wrench
    • Tighten the locking nut with an adjustable wrench
  4. step : Reattaching the Wheel (6:35)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 13mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(07:13 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 13mm Wrench



This part replaces:

  • Beck Arnley 101-7415
  • Beck Arnley 101-7726
  • Dorman 520-517
  • Dorman 520-518
  • Hollander 512-58322L
  • Hollander 512-58521R
  • Moog K620355
  • Moog K620354
  • OE # 485200M025, 485200M085
  • OE # 546682Y000
  • OE # 546182Y000
  • OE # 545012Y412
  • OE # 545002Y412
  • OE # 485215Y425, 48203AL525
  • OE # 485215Y485, 482045Y026
  • OE # 485215Y025
  • OE # 485215Y085
  • OE # 545002Y411
  • OE # 5450041U02
  • OE # 545006Y301
  • OE # 545012Y411
  • OE # 5450141U02
  • OE # 545016Y301
  • Beck Arnley 103-3071
  • Beck Arnley 103-3072
  • Monroe 171419
  • Monroe 171418
  • Moog ES3438
  • Moog K90432
  • Moog K90431
  • Moog EV458
  • OE # 48521-5Y025, 48521-5Y085
  • OE # 54668-2Y000
  • OE # 54618-2Y000
  • OE # 54501-2Y412
  • OE # 54500-2Y412

Vehicle Fit

  • 2000-2001 Infiniti I30 12 Piece Set Steering & Suspension Kit without Electronic Suspension
  • 2000-2002 Nissan Maxima 12 Piece Set Steering & Suspension Kit
Part #: 1ASFK03018

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More