Infiniti I30 Nissan Maxima CV Axle Shaft - 1AACV00021

Warranty & Shipping
Product Reviews
Vehicle Fit

This axle shaft is a new, aftermarket part. It is just what you need to get your vehicle back in good working order!


  • Fits LH (driver side) FRONT
  • Replaces dealer part number: 3910132U15, 3910131U10, 39101-32U15, 39101-31U10
  • Approximate Dimensions:
    • Height: 5.00 inches
    • Length: 29.5 inches
    • Width: 5.00 inches
  • Built to strict quality control standards
  • No core charge
  • Only fits vehicles WITHOUT a Locking or Limited Slip Differential
    • If you have a locking differential, it is identified by a tag on the transmission

Features & Benefits of each NEW CV (Constant Velocity) axle shaft:

  • 100% Neoprene Boots for excellent Ozone resistance. - Eliminates cracking; a leading cause for failure of CV boots
  • 3% moly grease. - Provides excellent high temperature and extreme pressure characteristics which extends the life of the joint
  • Axle nut supplied 100%. - If axle nut from the vehicle is worn or stripped there is no need to buy a separate axle nut because it is provided
  • Splines rolled 100%. - Guarantees proper installation of axle into mating hub and transmission eliminating installation hassle
  • Threads rolled 100%. - Guarantees proper installation of axle nut eliminating installation hassle

Note: This is for one axle shaft assembly. If you need a pair, please see our other listings.

Axle shafts may need replacing for a variety of different reasons. On vehicles that do heavy work or endure other extreme use you can actually break an axle or strip the splines or teeth. More often the CV joint wears out causing noises and vibration while accelerating or turning.

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Ive replaced the right side last year. Do I have to remove the right side axle in order to install/replace the drivers side axle assembly? Thank You.
Samuel B March 15, 2016
No, you can install these and uninstall these independently.
Brian F March 16, 2016
No you do not... Actually - if my driver side goes out (after having replaced this one) I will will also put new struts on both sides (over 100,000 miles). Once you do this once - successfully - you find out how easy it is...
Eric Z March 28, 2017
Remove the axle nut and 6 bolts. Remove the sway bar link. Slide the CV axle out. Super easy.
D A August 1, 2018
Was very easy ,dont have to remove thesawy bar
O N October 1, 2018
no you do not.
D O October 12, 2018
No you jujutsu take off the driver side tire and it should be right there
Bethany L October 25, 2018
Its always best to replace both sides. Once one goes a matter of time when the other needs replacement. You remove the tire and loose the axle drive nut ans shazzam you good to go.. Keep in mind A1 sends picture instructions in every order . makes the job alot easier and smooth as possible .. Enjoy!
O P November 7, 2018
No. The whole job took me less than 30 minutes.
L G November 15, 2018
Good practice to replace both at the same time, especially when they are pretty cheap compared to newer cars. But no you do not need to.
A R November 25, 2018
Nit on the . Chevrolet Cobalt. The axle comes out and goes back in the same. The only difference is the small shaft that was in the right side is not on the left. Replace the trans seal if you have the capability.
Big T B December 15, 2018
Year Make Model Description
1996-1999Infiniti I30 Infiniti I30 Front CV Axle Shaft Driver Side (excluding Limited Slip Differential)
1995-1999Nissan Maxima Nissan Maxima Front CV Axle Shaft for Models with Automatic Transmission Driver Side (excluding Limited Slip Differential)
Part #: 1AACV00021

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout