Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

Specifications:

  • Brand New Tie Rod Ends
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:55)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:15)
    • Measure the distance from the end of the boot to the center of the top of the tie rod
    • Note that measurement
    • Apply penetrating oil to the tie rod lock nut
    • Hold the inner tie rod with a 13mm wrench
    • Loosen the locking nut with an adjustable wrench
    • Turn the wheel by hand or with the steering wheel for better access to the tie rod
    • Remove the cotter pin with needle nose pliers
    • If you cannot remove the cotter pin, sheer it off by removing the 19mm bolt
    • Remove the 19mm bolt
    • Loosen the tie rod from the spindle by striking the spindle with a hammer
    • Pull the outer tie rod out of the handle
    • Hold the inner tie rod with a 13mm wrench
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (3:52)
    • Apply anti-seize grease to the inner tie rod
    • Hold the inner tie rod with a 13mm wrench
    • Twist the outer tie rod on by hand
    • Measure the distance from the end of the boot to the center of the top of the tie rod
    • This should equal the measurement recorded in Step 2
    • Push the outer tie rod into the spindle
    • Start the tie rod nut by hand
    • Tighten the nut to 55 foot-pounds of torque
    • Line the tie rod hole up with one of the slots in the nut
    • Insert the cotter pin and bend it to lock it
    • Hold the inner tie rod with a 13mm wrench
    • Tighten the locking nut with an adjustable wrench
  4. step : Reattaching the Wheel (6:35)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 13mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Awesome product
Nice to be able to find everything you need in one place. Shipping was fast . I have only had parts installed for 2 weeks now but so far no issues.
October 4, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this fit a 2006 g35 sedan?
Christopher M April 21, 2017
Yes, these will fit your 2006 G35 Sedan.
Alex P April 21, 2017
Are the inner tie rods ends better? Do they have more threads?
Jerry T May 3, 2018
All of our parts are made to OE specifications, so they should have the same amount of threads as the originals.
Tim K May 3, 2018
About the same
S E May 5, 2018
Will this fit a 2003 G35 coupe with Brembo back package?
C O July 22, 2018
Yes these will work for your application!
Tim K July 22, 2018
Year Make Model Description
2003Infiniti G35 Infiniti G35 Inner & Outer Tie Rod 4 Piece Set
2004-2006Infiniti G35 Infiniti G35 Rear Wheel Drive Inner & Outer Tie Rod 4 Piece Set
2007Infiniti G35 Infiniti G35 Coupe Inner & Outer Tie Rod 4 Piece Set
2003-2009Nissan 350Z Nissan 350Z Inner & Outer Tie Rod 4 Piece Set
Part #: 1ASFK02870


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:13 min)