This ignition key lock cylinder housing or Passlock ignition switch case is a new aftermarket part. It is the piece that your ignition lock cylinder fits into inside your dash or steering column. If your ignition lock cylinder is broken, damaged or malfunctioning then this part is for you!

Specifications:

  • Includes:
    • (1) Lock cylinder
    • (2) Keys
  • Brand new lock assembly
  • Replaces dealer part number: 5083915AB
  • Direct Replacement
  • Built to strict quality control standards
  • Correct for vehicles with or without the SMART KEY option*

This part makes a great replacement and has substantial cost savings over a dealer part.

*Note: If your vehicle is equipped with the SMART KEY option you must have the dealer recode the key.

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Disconnecting the Battery (0:57)
    • Disconnect your negative battery cable, which is located on the passenger side at the top of the shock tower
    • Use your 15mm wrench
  2. step : Removing Ignition Cylinder (1:07)
    • Use your torx drivers, remove the T30 screw
    • Remove the two T15 screws underneath
    • Pull up on the steering column cover to pop it off
    • Unclip the ignition cylinder bezel
    • Turn the key to the 'run' position and press the little button on the side and pull the cylinder out
  3. step : Install the New Ignition Cylinder (3:25)
    • Stick the new ignition cylinder in and click the button in
    • Click the cylinder bezel back in, making sure the little mark indicating the top position is pointing up
    • Put the steering column cover back on, starting with the bottom piece, and click the top one over
    • Screw in your two T15 screws and your T30 screw
  4. step : Reconnecting the battery (5:30)
    • Use your 15mm wrench

Tools needed for replacement:

    Torx Drivers & Sockets

  • T15 Torx Driver
  • T30 Torx Driver

  • Wrenches - Metric

  • 15mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Easy fix
Service was VERY fast. Came with a link for instructions. Worked perfectly.
September 22, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
Will the keys have to be programmed before you can start the vehicle, or just so the security feature works?
James S on Oct 22, 2017
BEST ANSWER: If your OEM key has a chip yes, this will need to be reprogrammed.

Vehicle Fit

  • 2005-2007 Chrysler 300 Ignition Lock Cylinder with Key
  • 1999-2004 Chrysler 300M Ignition Lock Cylinder with Key
  • 1998-2000 Chrysler Cirrus Ignition Lock Cylinder with Key
  • 1998-2004 Chrysler Concorde Ignition Lock Cylinder with Key
  • 1999-2001 Chrysler LHS Ignition Lock Cylinder with Key
  • 2001-2005 Chrysler PT Cruiser Ignition Lock Cylinder with Key
  • 2004 Chrysler Pacifica Ignition Lock Cylinder with Key
  • 1998-2000 Chrysler Sebring Convertible Ignition Lock Cylinder with Key
  • 1998-2006 Chrysler Town & Country Ignition Lock Cylinder with Key
  • 2000-2003 Chrysler Voyager Ignition Lock Cylinder with Key
  • 1998-2007 Dodge Caravan Ignition Lock Cylinder with Key
  • 2006-2007 Dodge Charger Ignition Lock Cylinder with Key
  • 1998-2007 Dodge Grand Caravan Ignition Lock Cylinder with Key
  • 1998-2004 Dodge Intrepid Ignition Lock Cylinder with Key
  • 2005-2007 Dodge Magnum Ignition Lock Cylinder with Key
  • 1998-2004 Dodge Neon Ignition Lock Cylinder with Key
  • 1998-2006 Dodge Stratus Sedan Ignition Lock Cylinder with Key
  • 1999 Dodge Viper Ignition Lock Cylinder with Key
  • 2003-2006 Dodge Viper Ignition Lock Cylinder with Key
  • 2008-2009 Dodge Viper Ignition Lock Cylinder with Key
  • 1998-2001 Jeep Cherokee Ignition Lock Cylinder with Key
  • 1999-2004 Jeep Grand Cherokee Ignition Lock Cylinder with Key
  • 2002-2004 Jeep Liberty Ignition Lock Cylinder with Key
  • 1998-2005 Jeep Wrangler Ignition Lock Cylinder with Key
  • 1998-2000 Plymouth Breeze Ignition Lock Cylinder with Key
  • 1998-2000 Plymouth Grand Voyager Ignition Lock Cylinder with Key
  • 1998-2001 Plymouth Neon Ignition Lock Cylinder with Key
  • 1997 Plymouth Prowler Ignition Lock Cylinder with Key
  • 1999 Plymouth Prowler Ignition Lock Cylinder with Key
  • 1998-2000 Plymouth Voyager Ignition Lock Cylinder with Key

This part replaces:

  • OE # 5083915AB
  • Dorman 924-703
  • Standard Motor Products US-427L
Part #: 1AIMX00146

Out of Stock

How-to Video:

(05:57 min)