Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Chrome

High Quality Replacement Ignition Lock cylinder with key.

Features:

  • Chrome bezel
  • Replaces dealer part number: 4746666
  • Die cast Metal Construction
  • Comes with Key
  • Direct Replacement

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnect the battery (0:57)
    • Use your 10 mm wrench to disconnect the negative battery terminal.
  2. step : Remove the steering column cover to access the ignition cylinder (1:13)
    • Start with the T30 Torx screw on the tilt lever.
    • Remove the six T15 torx screws underneath the steering column.
    • Pull the steering column cover off and set aside.
  3. step : Remove the ignition lock cylinder (3:00)
    • Put the key in and turn it to the run position.
    • Depress the little square button to pull the key cylinder out.
  4. step : Install the new lock cylinder from 1A Auto. (3:35)
    • Put the O ring onto the lock cylinder.
    • Depress the button and put the key into the cylinder.
    • Put the cylinder into place and make sure the little button clicks in to secure it.
    • Replace the steering column cover and secure with the T15 screws.
    • Screw the T30 screw back in to secure the tilt lever.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T30 Torx Driver
  • T15 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Ignition switch
The ignition switch is an exact fit for my 96 Chrysler town and country. Its a very good quality part at a very reasonable price. The shipping was free and was here before I expected. After I installed it and turned the key the little bell sounded. Never knew it had the little bell. Good product and I would recommended your company. Thanks again.
October 30, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1995-1999Chrysler Cirrus Chrysler Cirrus Chrome Ignition Lock Cylinder with Key
1993-1997Chrysler Concorde Chrysler Concorde Chrome Ignition Lock Cylinder with Key
1994-1997Chrysler LHS Chrysler LHS Chrome Ignition Lock Cylinder with Key
1994-1996Chrysler New Yorker Chrysler New Yorker Chrome Ignition Lock Cylinder with Key
1997Chrysler Sebring Chrysler Sebring Convertible Chrome Ignition Lock Cylinder with Key
1996-1997Chrysler Town & Country Chrysler Town & Country Chrome Ignition Lock Cylinder with Key
1996-1997Dodge Caravan Dodge Caravan Chrome Ignition Lock Cylinder with Key
1996-1997Dodge Grand Caravan Dodge Grand Caravan Chrome Ignition Lock Cylinder with Key
1993-1997Dodge Intrepid Dodge Intrepid Chrome Ignition Lock Cylinder with Key
1995-1997Dodge Stratus Dodge Stratus 4 Door Chrome Ignition Lock Cylinder with Key
1993-1997Eagle Vision Eagle Vision Chrome Ignition Lock Cylinder with Key
1996-1997Plymouth Breeze Plymouth Breeze Chrome Ignition Lock Cylinder with Key
1996-1997Plymouth Grand Voyager Plymouth Grand Voyager Chrome Ignition Lock Cylinder with Key
1996-1997Plymouth Voyager Plymouth Voyager Chrome Ignition Lock Cylinder with Key
Part #: 1AIMX00063


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:53 min)