These ignition key lock cylinder & tumblers are new aftermarket parts. If your ignition lock cylinder is broken, damaged, or malfunctioning then these are the parts for you!

Specifications:

  • Brand New Ignition Lock Cylinder
    • Includes tumblers for coding to original key(s)
  • Replaces dealer part numbers: 4L3Z-11582-BB, 4L3Z-11582-BC, 5F9Z-11582-BA, AU5Z-11582-A, AU5Z-11582-B, 4L3Z11582BB, 4L3Z11582BC, 5F9Z11582BA, AU5Z11582A, AU5Z11582B, SW6149, SW6845, SW6991
  • Direct replacement
  • Built to strict quality control standards
  • Does NOT fit models with Push Button Start Ignition System

This ignition key lock cylinder & tumblers kit makes a great replacement and has good cost savings over the dealer part!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Ignition Lock Cylinder (1:01)
    • Insert the key into the lock cylinder
    • Turn the key to the ON position
    • Push the D10 pin underneath the steering column with a pick
    • Remove the cylinder
  2. step : Removing the Tumbler (1:38)
    • Insert the tool into the back openings of the lock cylinder
    • Put the key in partway
    • Rotate the cylinder fully clockwise
    • Remove the door
    • Remove the cylinder without dropping the tumblers
  3. step : Removing and Installing the Tumblers (2:10)
    • Pull the tumblers out one by one in a staggered order and place them on the template provided as you find them in the cylinder
    • Lay out the new tumblers in the same order as the old ones
    • Insert a spring into the opening
    • Place grease on the tumbler
    • Insert the tumbler until it locks into place
    • Repeat the steps for the remaining tumblers
  4. step : Installing the Tumbler (5:45)
    • To test, collapse the tumblers with your finger
    • Insert the key, and see if the tumblers sit flat
    • Insert the tumbler into the cylinder
    • If it fits, remove the tumbler and apply grease
    • Reinsert the tumbler into the cylinder
    • Rotate the key hole until the tumbler seats in fully
    • Hold the backside, and test the key for rotation
  5. step : Reinstalling the Ignition Cylinder (7:28)
    • Align the D10 pin with the channel inside of the cylinder
    • Rotate the cylinder to the on position to compress the D10 pin
    • Test your ignition

Tools needed for replacement:

    General Tools

  • Pick

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
0
0
0
0
Fairly simple
Watched a video on You Tube and followed the included instructions and project was fairly simple. New lock cylinder fixed all my problems.
April 8, 2018
Purchased
2 months ago
Directions were perfect.
Had a issue with my drivers seat moving when I hit a bump. I thought I was going to have to change the whole thing and have a different key but after watching the video and getting the directions with the parts everything went smooth. Very small pieces with little number on them. So far no issues and old keys work fine. Thank you
March 25, 2018
Purchased
3 months ago
Perfect fit
Perfect fit, and came with all parts and then some. Got put together under 30 min and installed under an hour. Highly recommended to anyone
February 7, 2018
Purchased
4 months ago
Easy installation!
The videos and instructions for this product were spot on; the repair timeframe was about 40 minutes, and it fixed the issue with my wife's Mercury Mountaineer. Great service / delivery and great support, thanks!
January 16, 2018
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2011-2014 Ford Edge Ignition Lock Cylinder for Models without Push Button Start Dorman 924-717
  • 2004 Ford Expedition Ignition Lock Cylinder (Built After 2/04 Production Date) Dorman 924-717
  • 2005-2010 Ford Expedition Ignition Lock Cylinder Dorman 924-717
  • 2004 Ford Explorer Ignition Lock Cylinder (Built After 2/04 Production Date) Dorman 924-717
  • 2005-2012 Ford Explorer Ignition Lock Cylinder for Models without Push Button Start Dorman 924-717
  • 2008-2014 Ford F150 Truck Ignition Lock Cylinder Dorman 924-717
  • 2008-2014 Ford F250 Super Duty Truck Ignition Lock Cylinder Dorman 924-717
  • 2008-2014 Ford F350 Super Duty Truck Ignition Lock Cylinder Dorman 924-717
  • 2008-2014 Ford F450 Truck Ignition Lock Cylinder Dorman 924-717
  • 2008-2014 Ford F550 Truck Ignition Lock Cylinder Dorman 924-717
  • 2005 Ford Five Hundred Ignition Lock Cylinder (Built Before 4/20/05 Production Date) Dorman 924-717
  • 2005-2014 Ford Mustang Ignition Lock Cylinder Dorman 924-717
  • 2011-2012 Ford Taurus Ignition Lock Cylinder for Models without Push Button Start Dorman 924-717
  • 2004 Lincoln Aviator Ignition Lock Cylinder (Built After 2/04 Production Date) Dorman 924-717
  • 2005 Lincoln Aviator Ignition Lock Cylinder Dorman 924-717
  • 2011-2014 Lincoln MKX Ignition Lock Cylinder Dorman 924-717
  • 2008 Lincoln Mark LT Ignition Lock Cylinder Dorman 924-717
  • 2004 Lincoln Navigator Ignition Lock Cylinder (Built After 2/04 Production Date) Dorman 924-717
  • 2005-2014 Lincoln Navigator Ignition Lock Cylinder Dorman 924-717
  • 2005 Mercury Montego Ignition Lock Cylinder (Built Before 4/20/05 Production Date) Dorman 924-717
  • 2005-2010 Mercury Mountaineer Ignition Lock Cylinder Dorman 924-717

This part replaces:

  • OE # 4L3Z11582BB, 4L3Z11582BC
  • OE # 5F9Z11582BA
  • Dorman 924-717
Only 4 left in stock
Part #: 1AIMX00181

Ships Same Day for orders placed by 4 P.M. ET

Dorman
Brand #: 924-717

How-to Video:

(07:59 min)