Replaces

Ignition Lock Cylinder Case Housing Dorman 924-702 - 1AIMX00140

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This ignition key lock cylinder housing or Passlock ignition switch case is a new aftermarket part. It is the piece that your ignition lock cylinder fits into inside your dash. When your key becomes stuck in the ignition, this piece usually has to be drilled into thus destroying your ability to start the car. This housing has been designed to replace the broken part.

Specifications:

  • Diecast Metal Construction
  • Holds lgnition lock cylinder and mounts inside dash
  • Replaces dealer part number: 25832354
  • Direct Replacement
  • Built to strict quality control standards

This part makes a great replacement and has substantial cost savings over a dealer part.

 

Item Condition: New

WARNING:  This product can expose you to chemicals including Cadmium and Cadmium Compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Accessing the Lock Cylinder Case (0:24)
    • Use an 8mm wrench to disconnect your negative battery cable
    • Remove the car cigarette lighter
    • Pull the ashtray out
    • Remove the trim panel. Unplug the cigarette lighter to free it
    • Remove the three 7mm bolts that hold the radio in
    • Pull the radio out and disconnect the radio and antenna connections to free the radio
  2. step : Changing the Lock Cylinder Case (1:55)
    • Turn the key to the on position
    • Insert a screwdriver into the small hole underneath the lock cylinder
    • Pull the key back to remove the lock cylinder
    • Press the small button on the back of the cylinder while pushing to separate the case from the cylinder
    • Push the button down and slide the cylinder into the new case
    • Turn the key to on and reinsert the cylinder
  3. step : Replacing the Radio and Trim (3:37)
    • Reconnect the radio and antenna to the radio
    • Line up the radio and push it into place
    • Reinsert the three bolts
    • Reconnect the cigarette lighter and snap the trim back into place
    • Replace the ashtray and lighter
    • Reconnect the battery

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2005Chevy Classic Chevy Classic Ignition Lock Cylinder Case Housing Dorman 924-702
2000-2005Chevy Impala Chevy Impala Ignition Lock Cylinder Case Housing Dorman 924-702
2004-2005Chevy Impala Chevy Impala SS Ignition Lock Cylinder Case Housing Dorman 924-702
1997-2003Chevy Malibu Chevy Malibu Ignition Lock Cylinder Case Housing Dorman 924-702
2000-2005Chevy Monte Carlo Chevy Monte Carlo Ignition Lock Cylinder Case Housing Dorman 924-702
2000-2005Chevy Monte Carlo Chevy Monte Carlo SS Ignition Lock Cylinder Case Housing Dorman 924-702
1999-2004Oldsmobile Alero Olds Alero Ignition Lock Cylinder Case Housing Dorman 924-702
1997-1999Oldsmobile Cutlass Olds Cutlass Ignition Lock Cylinder Case Housing Dorman 924-702
1998-2002Oldsmobile Intrigue Olds Intrigue Ignition Lock Cylinder Case Housing Dorman 924-702
1999-2005Pontiac Grand Am Pontiac Grand Am Ignition Lock Cylinder Case Housing Dorman 924-702
Only 2 left in stock
Part #: 1AIMX00140


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Dorman
Brand #: 924-702

How-to Video:

(04:33 min)