Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   3 Piece Set

The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

Specifications:

  • Brand New
  • Comes as a SET OF 3
  • Replaces dealer part numbers: 6218283, 30520P8EA01, 30520-P8E-A01, 30520P8FA01, 30520-P8F-A01, 30520P8FA02, 30520-P8F-A02
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested
  • Fits 6 cylinder engines only

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Engine Covers (0:53)
    • Remove the four 10mm bolts from the upper engine cover
    • Lift off the upper engine cover
    • Loosen the two plastic clips on the lower engine cover with a flat blade screwdriver
    • Lift off the lower engine cover
  2. step : Removing the Ignition Coil (1:45)
    • Disconnect the ignition coil wiring harness
    • Remove the T40 Torx bolt from the ignition coil
    • Pull the ignition coil up and out
  3. step : Installing the Ignition Coil (2:55)
    • Push the ignition coil into place
    • Insert the T40 Torx bolt into the ignition coil
    • Connect the ignition coil wiring harness
    • Repeat Steps 2 through 3 for the remaining coils
  4. step : Installing the Engine Covers (3:51)
    • Push on the lower engine cover
    • Tighten the lower engine cover clips with a flat blade screwdriver
    • Push on the upper engine cover
    • Insert the four 10mm bolts into the upper engine cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T40 Torx Bit

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2003Acura CL Acura CL Ignition Coil 3 Piece Set
2005-2008Acura RL Acura RL Ignition Coil 3 Piece Set
2000-2008Acura TL Acura TL Ignition Coil 3 Piece Set
2000-2007Honda Accord Honda Accord Ignition Coil 3 Piece Set V6 3.0L
1999-2007Honda Odyssey Honda Odyssey Ignition Coil 3 Piece Set
2008-2010Honda Odyssey Honda Odyssey (excluding EX-L Models) (excluding Touring Models) Ignition Coil 3 Piece Set
Part #: 1AERK00271


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:59 min)