The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

This Coil Over Plug Ignition Coil Set features the following specifications:

  • Comes as a SET:
    • Includes Four (4) Coils
  • Brand New
  • Replaces dealer part number: 88958974
  • Built to strict quality control standard
  • Direct replacement
  • 100% factory tested

These coils are for a distributorless application. Sold as a SET of FOUR. Please see our other listing if a single coil is needed.

 

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Part Details

  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Air Intake Box (0:57)
    • Remove the two 8mm bolts holding the top of the air box
    • Remove the two hose clamps with a flat blade screwdriver
    • Twist and remove the two vacuum lines
    • Pull the air intake box up and out
    • Twist the air intake hose collar off
  2. step : Removing the Ignition Coil (2:45)
    • Disconnect the locking tab with a flat blade screwdriver
    • Disconnect the ignition coil wiring harness
    • Remove the 10mm bolt from the engine coil
    • Pull the ignition coil up and out
  3. step : Installing the New Ignition Coil (3:59)
    • Insert the ignition coil into place
    • Insert and tighten the 10mm bolt
    • Connect the ignition coil wiring lead
    • Replace the locking pad
  4. step : Installing the Air Intake Box (5:01)
    • Twist the air intake hose collar into place
    • Insert the air intake box into place
    • Insert the two vacuum lines
    • Insert and tighten the two hose clamps with a flat blade screwdriver
    • Insert and tighten the two 8mm bolts holding the top of the air box

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
One Happy Customer!
Sorry that I took so long to write a review of the items, I just installed them this past weekend and my 2006 Chevy Colorado runs great! Your prices are amazing, compare to the local parts stores here in my area. Plus lifetime warranty on the Ignition Coils can't beat that! I will continue to purchase future parts from you guys. I am one satisfied customer. Excellent customer service too.
I rate you guys 10 stars not 5.

Thanks
The Rios Family
August 13, 2018
Purchased
3 weeks ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2004-2006Chevy Colorado Chevy Colorado Ignition Coil 4 Piece Set L4 2.8L
2004-2006GMC Canyon GMC Canyon Ignition Coil 4 Piece Set L4 2.8L
2007-2008Isuzu i-290 Isuzu i-290 Ignition Coil 4 Piece Set L4 2.8L
Part #: 1AERK00110


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:32 min)