The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

This coil over plug Ignition Coil SET features the following specifications:

  • SET contains 8 coils. Enough for one 8 cylinder engine
  • New not remanufactured
  • Replaces dealer part numbers: E593C, 89057951, 56028138AF, 56028138AE
  • Built to strict quality control standard
  • Direct replacement
  • 100% factory tested
  • Fits the following Chrysler, Jeep, & Mitsubishi 8 Cylinder engine applications as listed:
    • V8 4.7L

This coil is a distributorless application. Sold as a set of 8. If you need a single coil, please see our other listings.

 

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Ignition Coil (0:32)
    • Pull the hose out of its clamp
    • Disconnect the ignition coil wiring harness
    • Pull off the hose clamp
    • Remove the 10mm nut from the ignition coil
    • Pull the ignition coil up and out
  2. step : Installing the New Ignition Coil (1:16)
    • Put the new ignition coil into place
    • Fasten the 10mm nut onto the ignition coil
    • Connect the ignition coil wiring harness
    • Push the hose clamp into place
    • Push the hose into its clamp

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 8 answers
Do these come with o-rings as well as the boots to seal spark plugs hole?
Bradley D on Nov 17, 2017
BEST ANSWER: Yes these come with the o-rings and boots!
Is this hard to do by a non mechanic?
George S on Oct 24, 2017
BEST ANSWER: I would say it depends on the application. I did this on a 2008 Jeep Grand Cherokee and I would rate it probably 2 or 3 difficulty on a scale of ten. Really once you get under everything (intake box) it’s simple, there is one bolt per coil and one plug wire per coil so if you do it one at a time there’s no way to mess it up just don’t over tighten. I put some of the dielectric grease on inside the boot so the plugs wouldn’t stick to it and to protect from breakdown from the voltage over time. If you’re doing this on a similar model I would recommend this over taking it to a shop any day. It’s not nearly as difficult as it may appear.
Who is the manufacture of these ?
Tony B on Dec 14, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us who are based in either China or Taiwan, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

How-to Video:

(02:15 min)

Tools List:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket




Vehicle Fit

  • 2007 Chrysler Aspen Ignition Coil 8 Piece Set V8 4.7L
  • 2000-2007 Dodge Dakota Ignition Coil 8 Piece Set V8 4.7L
  • 2002-2007 Dodge Ram 1500 Truck Ignition Coil 8 Piece Set V8 4.7L
  • 2006-2007 Jeep Commander (XK) Ignition Coil 8 Piece Set V8 4.7L
  • 1999-2008 Jeep Grand Cherokee Ignition Coil 8 Piece Set V8 4.7L
  • 2006-2007 Mitsubishi Raider Ignition Coil 8 Piece Set V8 4.7L
Part #: 1AERK00083

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More