• SET contains 6 Coils
    • Enough for one 6 Cylinder Engine
  • New not remanufactured
  • Built to strict quality control standard
  • Direct replacements
  • 100% factory tested
  • Fits V6 2.7L Engine only

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function properly for your specific application.

Optimum Performance

Optimal performance, TRQ ignition coils are designed to meet or exceed the requirements of the vehicle.  TRQ ignition coils provide the correct primary and secondary resistance, voltage output, and spark energy that the vehicle needs to restore to its original operating condition.

Premium Quality

Manufactured with quality components and materials by using advanced technology to meet the highest quality control standards in the industry.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Accessing the Ignition Coils (0:57)
    • Undo the cable clip
    • Move the cables aside
    • Disconnect the PCV hose
    • Move the PCV hose aside
  2. step : Removing the Ignition Coil (1:35)
    • Disconnect the ignition coil wiring harness
    • Remove the two 8mm bolts from the ignition coil
    • Pull the ignition coil up and out
  3. step : Removing the Spark Plug (2:26)
    • Loosen the spark plug with a 5/8 inch spark plug socket
    • Remove the spark plug
  4. step : Preparing the New Spark Plug (3:44)
    • Find the spark plug gap for your vehicle in the under hood decal or your owner's manual
    • Check the gap with a spark plug gapping tool
    • The correct setting of the tool should slide into and out of the gap with some resistance
    • Adjust the gap as necessary
  5. step : Installing the New Spark Plug (4:34)
    • Put the new spark plug into place
    • Tighten the spark plug with a 5/8 inch spark plug socket
    • Tighten the spark plug to between 20 - 25 foot-pounds of torque
  6. step : Installing the New Ignition Coil (5:33)
    • Push the new ignition coil into place with the wiring connector facing the rear of the vehicle
    • Insert the two 8mm bolts into the ignition coil
    • Connect the ignition coil wiring harness
    • Repeat Steps 2 through 6 for the remaining coils
  7. step : Reconnecting the Cables (7:01)
    • Reconnect the PCV hose
    • Put the cables back into their clip
    • Fasten the cable clip

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

  • Sockets - SAE

  • 5/8 Inch Spark Plug Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005 Chrysler 300 Ignition Coil 6 Piece Set V6 2.7L
  • 1998-2004 Chrysler Concorde Ignition Coil 6 Piece Set V6 2.7L
  • 2001-2005 Chrysler Sebring Ignition Coil 6 Piece Set V6 2.7L
  • 1998-2004 Dodge Intrepid Ignition Coil 6 Piece Set V6 2.7L
  • 2005 Dodge Magnum Ignition Coil 6 Piece Set V6 2.7L
  • 2001-2005 Dodge Stratus Ignition Coil 6 Piece Set V6 2.7L

This part replaces:

  • Hollander 610-02823
  • OE # 4609095AB
  • OE # 4609095AC
  • OE # 4609095AD
  • OE # 4609095AE
  • OE # 4609095AF
  • OE # 4609095AG
  • Standard Motor Products UF-199
Part #: 1AERK00046

How-to Video:

(07:41 min)