The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

This coil over plug Ignition Coil SET features the following specifications:

  • SET contains 6 coils. Enough for one 6 cylinder engine
  • New not remanufactured
  • Replaces dealer part numbers: 4609088AC, 4609088AD, 4609088AF, 4609088AG, 04609088AD, 04609088AF, 04609088AC
  • Built to strict quality control standard
  • Direct replacement
  • 100% factory tested
  • Fits the following Chrysler, Dodge, & Plymouth 6 cylinder engine applications as listed:
    • V6 3.2L
    • V6 3.5L

This coil is a distributorless application. Sold as a set of 6. If you need a single coil, please see our other listings.

 

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Accessing the Ignition Coils (0:57)
    • Undo the cable clip
    • Move the cables aside
    • Disconnect the PCV hose
    • Move the PCV hose aside
  2. step : Removing the Ignition Coil (1:35)
    • Disconnect the ignition coil wiring harness
    • Remove the two 8mm bolts from the ignition coil
    • Pull the ignition coil up and out
  3. step : Removing the Spark Plug (2:26)
    • Loosen the spark plug with a 5/8 inch spark plug socket
    • Remove the spark plug
  4. step : Preparing the New Spark Plug (3:44)
    • Find the spark plug gap for your vehicle in the under hood decal or your owner's manual
    • Check the gap with a spark plug gapping tool
    • The correct setting of the tool should slide into and out of the gap with some resistance
    • Adjust the gap as necessary
  5. step : Installing the New Spark Plug (4:34)
    • Put the new spark plug into place
    • Tighten the spark plug with a 5/8 inch spark plug socket
    • Tighten the spark plug to between 20 - 25 foot-pounds of torque
  6. step : Installing the New Ignition Coil (5:33)
    • Push the new ignition coil into place with the wiring connector facing the rear of the vehicle
    • Insert the two 8mm bolts into the ignition coil
    • Connect the ignition coil wiring harness
    • Repeat Steps 2 through 6 for the remaining coils
  7. step : Reconnecting the Cables (7:01)
    • Reconnect the PCV hose
    • Put the cables back into their clip
    • Fasten the cable clip

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

  • Sockets - SAE

  • 5/8 Inch Spark Plug Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Best bang for your buck.
I purchased this set of 6 ignition coils after a local shop replaced one and told me that I'm good, well the problem came back no more than a week later and the shop wanted to charge me 75 dollars per coil plus labor.

I decided I'm going to do it myself because I want to make sure it is done right. Local stores had them for $55/per and only had 1 or 2 in stock at any given time. The quality of the coils I received are exactly the same as the new one the shop installed and I am pretty pleased.

Going on a week since installing them myself and haven't had the issue return.
February 18, 2018
Purchased
3 weeks ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(07:41 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

  • Sockets - SAE

  • 5/8 Inch Spark Plug Socket




Vehicle Fit

  • 2005 Chrysler 300 Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit G)
  • 1999-2004 Chrysler 300M Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit G)
  • 2002-2004 Chrysler 300M Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit K)
  • 1998-2001 Chrysler Concorde Ignition Coil 6 Piece Set V6 3.2L (8th Vin Digit J)
  • 2002-2004 Chrysler Concorde Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit M)
  • 2002-2004 Chrysler Concorde Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit G)
  • 1999-2001 Chrysler LHS Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit G)
  • 2004-2006 Chrysler Pacifica Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit 4)
  • 1999-2002 Chrysler Prowler Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit G)
  • 1998-2001 Dodge Intrepid Ignition Coil 6 Piece Set V6 3.2L (8th Vin Digit J)
  • 2000-2004 Dodge Intrepid Ignition Coil 6 Piece Set V6 3.6L (8th Vin Digit V)
  • 2001-2004 Dodge Intrepid Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit G)
  • 2002-2004 Dodge Intrepid Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit M)
  • 2005 Dodge Magnum Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit G or V)
  • 1999-2002 Plymouth Prowler Ignition Coil 6 Piece Set V6 3.5L (8th Vin Digit G)
Part #: 1AERK00045

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More