The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

Specifications:

  • Set contains 4 coils, enough for one 4 cylinder engine
  • New not remanufactured
  • Built to strict quality control standard
  • Direct replacement
  • 100% factory tested

This coil is a distributorless application. Sold as a set of 4. If you need a single coil, please see our other listings.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Part Details

  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Ignition Coil (0:30)
    • Remove the two Phillips head screws from the ignition cover
    • Pull off the ignition cover
    • Disconnect the ignition coil wiring harness
    • Remove the 8mm bolt from the ignition coil
    • Pull the coil up and out
  2. step : Installing the New Ignition Coil (1:25)
    • Put the new ignition coil into place
    • Insert the 8mm bolt into the ignition coil
    • Connect the ignition coil wiring harness
    • Put the ignition cover into place
    • Insert the two Phillips screws into the ignition cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Complete set
Competitors charge the same price for each individual coil. This set is ideal for the refurbishment project ideally. My initial thought was to replace just the one seal as water was flowing into the head and grounding out the coil pack and plug causing pre- ignition and carbon build up. As the lip of the pack was torn and cracked due to ten years old of running, I decided to replace all four and lubricate each with dielectric grease to keep the surface plyable and provide insulation from the block.
May 20, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1999-2003Chevy Tracker Chevy Tracker Ignition Coil 4 Piece Set L4 2.0L (8th Vin Digit C)
2001-2002Chevy Tracker Chevy Tracker Ignition Coil 4 Piece Set L4 1.6L (8th Vin Digit 6)
2002-2003Suzuki Aerio Suzuki Aerio Ignition Coil 4 Piece Set
2004-2005Suzuki Aerio Suzuki Aerio Ignition Coil 4 Piece Set
1999-2002Suzuki Esteem Suzuki Esteem Ignition Coil 4 Piece Set L4 1.8L (8th Vin Digit 4)
1998Suzuki Sidekick Suzuki Sidekick Ignition Coil 4 Piece Set L4 1.8L (8th Vin Digit 2)
1999-2003Suzuki Vitara Suzuki Vitara Ignition Coil 4 Piece Set L4 2.0L

This part replaces:

  • Hollander 610-58560
  • OE # 3340065G01
  • OE # 3341077E20
  • OE # 3341077E21
  • OE # 3341077E21MIT
  • OE # 91175339
  • Standard Motor Products UF-237
Part #: 1AERK00027


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(02:31 min)