The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time and cause a misfire condition. In engines like this that use a coil, if the coil goes bad, the complete assembly needs to be replaced.

Specifications:

  • New not remanufactured
  • Replaces dealer part numbers: 4M5E-12A366-AA, 4M5G-12A366-BA, 4M5G-12A366-BB, 4M5G-12A366-BC, 4M5E12A366AA, 4M5G12A366BA, 4M5G12A366BB, 4M5G12A366BC, DG501, DG504, DG507, DG541, LF161-8100A, LF161-8100A, LF1618100A, LF1618100A
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested
  • Fits the following Ford/Mazda 4 cylinder engines as listed per application:
    • L4 2.0L
    • L4 2.3L

 

This is an electrical part and is tested before it leaves our manufacturer.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Ignition Coil (0:31)
    • Push on the tab and disconnect the ignition coil wiring harness
    • Remove the 8mm bolt
    • Pull the ignition coil up and out
  2. step : Installing the New Ignition Coil (1:08)
    • Push the ignition coil into place
    • Insert and tighten the 8mm bolt
    • Connect the ignition coil wiring harness
    • Repeat the process for all four

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2008 Ford Escape Ignition Coil L4 2.3L
  • 2003-2004 Ford Focus Ignition Coil L4 2.3L
  • 2005-2011 Ford Focus Ignition Coil
  • 2010-2013 Ford Transit Connect Ignition Coil L4 2.0L Gas Engine
  • 2004-2005 Mazda 3 Ignition Coil
  • 2005 Mazda 6 Ignition Coil L4 2.3L Automatic Transmission with
  • 2005-2006 Mazda Tribute Ignition Coil L4 2.3L
  • 2008 Mazda Tribute Ignition Coil L4 2.3L
  • 2005-2008 Mercury Mariner Ignition Coil L4 2.3L

This part replaces:

  • OE # ZZCA18100
  • OE # 4M5G12A366BC
  • Hollander 610-00153
  • Standard Motor Products FD-505
Part #: 1AECI00185


Order must be placed by 4pm ET

How-to Video:

(01:47 min)