Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time and cause a misfire condition. In engines like this that use a coil, if the coil goes bad, the complete assembly needs to be replaced.


  • Brand New
  • Replaces dealer part numbers: 90919-02230, 9091902230, 90080-19027, 9008019027, 90919-02249, 9091902249
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested

This coil is a distributorless application. Sold as Each. 8 are required per vehicle. Replace individually as needed.


Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Ignition Coil (0:54)
    • Remove the 10mm bolt from the ignition coil
    • Twist and pull the ignition coil up and out
    • Disconnect the electrical connector
  2. step : Installing the Ignition Coil (2:13)
    • Connect the electrical connector
    • Press the ignition coil into place
    • Tighten the 10mm bolt to the ignition coil

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

4.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great product poor service
This was an exact match to the factory one. A lot cheaper but it appears to be doing the same job. The product is great but it took about 8 days to get it for to an address mix up by 1A Auto. Normally the service is good.. not sure who dropped the ball this time. Im not sure I will order again because in affaid this could happen again..its not good being without your car due to someones mistake..its a shame that I might have to let 1A Auto go due to this incident..they have great products
May 19, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
who makes Delphi?
Paul A December 6, 2017
Delphi is their own company which is headquartered in Gillingham, Kent, UK and manufacturers automotive part worldwide.
Alex P December 6, 2017
Year Make Model Description
2001-2007Lexus GS430 Lexus GS430 Ignition Coil
2003-2009Lexus GX470 Lexus GX470 Ignition Coil
2001-2006Lexus LS430 Lexus LS430 Ignition Coil
1998-2007Lexus LX470 Lexus LX470 Ignition Coil
2002-2010Lexus SC430 Lexus SC430 Ignition Coil
2003-2009Toyota 4Runner Toyota 4Runner Ignition Coil V8 4.7L
1998-2007Toyota Land Cruiser Toyota Land Cruiser Ignition Coil V8 4.7L
2001-2009Toyota Sequoia Toyota Sequoia Ignition Coil V8 4.7L
2000-2009Toyota Tundra Toyota Tundra Ignition Coil V8 4.7L
Part #: 1AECI00144

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:23 min)