The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time and cause a misfire condition. In engines like this that use a coil, if the coil goes bad, the complete assembly needs to be replaced.

This Ignition Coil features the following specifications:

  • Brand New
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested

This coil is a distributorless application. Sold as Each. 4 or 6 are required per vehicle, based on engine size. Replace individually as needed.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function properly for your specific application.

Optimum Performance

Optimal performance, TRQ ignition coils are designed to meet or exceed the requirements of the vehicle.  TRQ ignition coils provide the correct primary and secondary resistance, voltage output, and spark energy that the vehicle needs to restore to its original operating condition.

Premium Quality

Manufactured with quality components and materials by using advanced technology to meet the highest quality control standards in the industry.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Ignition Coil (0:38)
    • Turn the two clips on the engine cover with a flat blade screwdriver
    • Pull off the engine cover
    • Disconnect the ignition coil wiring harness
    • Remove the 10mm nut from the ignition coil
    • Pull the ignition coil out of the engine
  2. step : Installing the New Ignition Coil (1:40)
    • Push the ignition coil into the engine
    • Connect the ignition coil wiring harness
    • Fasten the 10mm nut onto the ignition coil
    • Repeat these steps to replace each ignition coil
    • Put the engine cover into place
    • Tighten the two clips on the engine cover with a flat blade screwdriver

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
It fit right on and no problems and looks almost like factory Honda part.
March 20, 2018
Purchased
2 months ago
Best money can buy
Parts arrived in a couple days. They were just like the ones I took off. For the money, I was really surprised and happy with my purchase. Just ordered rotors and pads
February 20, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2005 Acura EL Ignition Coil L4 1.7L
  • 2001-2009 Acura MDX Ignition Coil V6 3.5L
  • 2001-2005 Honda Civic Ignition Coil L4 1.7L
  • 2003-2008 Honda Pilot Ignition Coil V6 3.5L
  • 2006-2008 Honda Ridgeline Ignition Coil V6 3.5L
  • 2004-2007 Saturn Vue Ignition Coil V6 3.5L

This part replaces:

  • OE # 30520PVFA01, 30520RDJA01, 30520PVKA01, 30520PGKA01, 30520PVJA01, 8081523, 12582000
  • Hollander 610-50106
  • Hollander 610-58597
  • Hollander 610-58667
  • Hollander 610-02857
  • Standard Motor Products UF-400
Part #: 1AECI00122

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(02:50 min)