Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

Specifications:

  • New not remanufactured
  • Built to strict quality control standard
  • Direct replacement
  • 100% factory tested
  • Fits V6 2.7L Engine only

This coil is a distributorless application. Sold as Each. 6 are required per vehicle, replace individually as needed.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Accessing the Ignition Coils (0:57)
    • Undo the cable clip
    • Move the cables aside
    • Disconnect the PCV hose
    • Move the PCV hose aside
  2. step : Removing the Ignition Coil (1:35)
    • Disconnect the ignition coil wiring harness
    • Remove the two 8mm bolts from the ignition coil
    • Pull the ignition coil up and out
  3. step : Removing the Spark Plug (2:26)
    • Loosen the spark plug with a 5/8 inch spark plug socket
    • Remove the spark plug
  4. step : Preparing the New Spark Plug (3:44)
    • Find the spark plug gap for your vehicle in the under hood decal or your owner's manual
    • Check the gap with a spark plug gapping tool
    • The correct setting of the tool should slide into and out of the gap with some resistance
    • Adjust the gap as necessary
  5. step : Installing the New Spark Plug (4:34)
    • Put the new spark plug into place
    • Tighten the spark plug with a 5/8 inch spark plug socket
    • Tighten the spark plug to between 20 - 25 foot-pounds of torque
  6. step : Installing the New Ignition Coil (5:33)
    • Push the new ignition coil into place with the wiring connector facing the rear of the vehicle
    • Insert the two 8mm bolts into the ignition coil
    • Connect the ignition coil wiring harness
    • Repeat Steps 2 through 6 for the remaining coils
  7. step : Reconnecting the Cables (7:01)
    • Reconnect the PCV hose
    • Put the cables back into their clip
    • Fasten the cable clip

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

  • Sockets - SAE

  • 5/8 Inch Spark Plug Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005Chrysler 300 Chrysler 300 Ignition Coil V6 2.7L
1998-2004Chrysler Concorde Chrysler Concorde Ignition Coil V6 2.7L
2001-2005Chrysler Sebring Chrysler Sebring Ignition Coil V6 2.7L
1998-2004Dodge Intrepid Dodge Intrepid Ignition Coil V6 2.7L
2005Dodge Magnum Dodge Magnum Ignition Coil V6 2.7L
2001-2005Dodge Stratus Dodge Stratus Ignition Coil V6 2.7L
Only 5 left in stock
Part #: 1AECI00115


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:41 min)