The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

Specifications:

  • New not remanufactured
  • Built to strict quality control standard
  • Direct replacement
  • 100% factory tested

This coil is a distributorless application. Sold as Each. 4 are required per car, . Replace individually as needed.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function properly for your specific application.

Optimum Performance

Optimal performance, TRQ ignition coils are designed to meet or exceed the requirements of the vehicle.  TRQ ignition coils provide the correct primary and secondary resistance, voltage output, and spark energy that the vehicle needs to restore to its original operating condition.

Premium Quality

Manufactured with quality components and materials by using advanced technology to meet the highest quality control standards in the industry.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Ignition Coil (0:28)
    • Make sure you have the correct ignition coil for your engine
    • Disconnect the ignition coil wiring harness with a flat blade screwdriver
    • Remove the 10mm bolt from the ignition coil
    • Pull the ignition coil up and out
  2. step : Installing the New Ignition Coil (1:11)
    • Put the new ignition coil into place
    • Insert the 10mm bolt into the ignition coil
    • Connect the ignition coil wiring harness
    • Repeat Steps 1 and 2 for the remaining ignition coils

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Excellent
Bought this to replace a factory coil pack that went bad. It worked great and at a fraction of the cost of local parts stores.
May 9, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2002 Chevy Prizm Ignition Coil L4 1.8L (8th Vin Digit 8)
  • 2003-2008 Pontiac Vibe Ignition Coil L4 1.8L (8th Vin Digit 8)
  • 2000-2005 Toyota Celica (Engine ID 1ZZFE) GT Ignition Coil L4 1.8L
  • 2000-2008 Toyota Corolla (Engine ID 1ZZFE) Ignition Coil L4 1.8L
  • 2000-2005 Toyota MR2 (Engine ID 1ZZFE) Ignition Coil L4 1.8L
  • 2003-2008 Toyota Matrix (Engine ID 1ZZFE) Ignition Coil L4 1.8L

This part replaces:

  • OE # 9008019019, 9008019015, 94859441, 94859442, 9091902239, 90919T2002
  • Hollander 610-58573
  • Standard Motor Products UF-247
Part #: 1AECI00090

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(01:43 min)