The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

This coil over plug Ignition Coil features the following specifications:

  • Brand New
  • Replaces dealer part numbers: 3L3E-12A366-CA, 3L3E12A366CA, 3L3U-12A366-BB, 3L3U12A366BB, 3L3Z-12029-BA, 3L3Z12029BA, DG 511, DG511
  • Built to strict quality control standard
  • Direct replacement
  • 100% factory tested

This coil is a distributorless application. Sold as Each. 8 are required per vehicle, replace individually as needed.

 

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Ignition Coil (0:31)
    • Disconnect the ignition coil wiring harness
    • Remove the two 8mm bolts from the ignition coil
    • Pull the ignition coil up and out
  2. step : Installing the New Ignition Coil (1:53)
    • Push the new ignition coil into place with the wiring connector facing the rear of the vehicle
    • Insert the two 8mm bolts into the ignition coil
    • Connect the ignition coil wiring harness
    • Repeat Steps 1 and 2 for the remaining coils

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

2.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
0
1
0
Did not last.
The ignition coil arrived within a few days and was very easy to install. I replaced the spark plug at the same time and installed the new coil. It seemed to work perfectly. After two weeks, the check engine light came back on. Took my Mercury Mountaineer back to my local Ford dealer and had a diagnostic done and came back that the same ignition coil was bad and misfiring.
June 26, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005-2007Ford Expedition Ford Expedition Ignition Coil
2008Ford Expedition Ford Expedition Ignition Coil for Models with Black Ignition Coil Boot
2006-2007Ford Explorer Ford Explorer V8 4.6L Ignition Coil
2008Ford Explorer Ford Explorer V8 4.6L Ignition Coil for Models with Black Ignition Coil Boot
2007Ford Explorer Sport Trac Ford Explorer Sport Trac V8 4.6L Ignition Coil
2008Ford Explorer Sport Trac Ford Explorer Sport Trac V8 4.6L Ignition Coil for Models with Black Ignition Coil Boot
2004-2007Ford F150 Truck Ford F150 Truck V8 5.4L Ignition Coil
2008Ford F150 Truck Ford F150 Truck V8 5.4L Ignition Coil for Models with Black Ignition Coil Boot
2005-2007Ford F250 Super Duty Truck Ford F250 Super Duty Truck V8 5.4L Ignition Coil
2005-2007Ford F250 Super Duty Truck Ford F250 Super Duty Truck V10 6.8L Ignition Coil
2008Ford F250 Super Duty Truck Ford F250 Super Duty Truck V8 5.4L Ignition Coil for Models with Black Ignition Coil Boot
2008Ford F250 Super Duty Truck Ford F250 Super Duty Truck V10 6.8L Ignition Coil for Models with Black Ignition Coil Boot
2005-2007Ford F350 Super Duty Truck Ford F350 Super Duty Truck V8 5.4L Ignition Coil
2005-2007Ford F350 Super Duty Truck Ford F350 Super Duty Truck V10 6.8L Ignition Coil
2008Ford F350 Super Duty Truck Ford F350 Super Duty Truck V10 6.8L Ignition Coil for Models with Black Ignition Coil Boot
2008Ford F350 Super Duty Truck Ford F350 Super Duty Truck V8 5.4L Ignition Coil for Models with Black Ignition Coil Boot
2005-2007Ford F450 Truck Ford F450 Truck V10 6.8L Ignition Coil
2008Ford F450 Truck Ford F450 Truck V10 6.8L Ignition Coil for Models with Black Ignition Coil Boot
2005-2007Ford F550 Truck Ford F550 Truck V10 6.8L Ignition Coil
2008Ford F550 Truck Ford F550 Truck V10 6.8L Ignition Coil for Models with Black Ignition Coil Boot
2005-2007Ford Mustang Ford Mustang GT Ignition Coil V8 4.6L
2008Ford Mustang Ford Mustang V8 4.6L Ignition Coil for Models with Black Ignition Coil Boot
2006-2007Lincoln Mark LT Lincoln Mark LT Ignition Coil
2008Lincoln Mark LT Lincoln Mark LT Ignition Coil for Models with Black Ignition Coil Boot
2005-2007Lincoln Navigator Lincoln Navigator Ignition Coil
2008Lincoln Navigator Lincoln Navigator Ignition Coil for Models with Black Ignition Coil Boot
2006-2007Mercury Mountaineer Mercury Mountaineer V8 4.6L Ignition Coil
2008Mercury Mountaineer Mercury Mountaineer V8 4.6L Ignition Coil for Models with Black Ignition Coil Boot

This part replaces:

  • Hollander 610-00157
  • OE # 3L3Z 12029 BA
  • Standard Motor Products FD-508
Part #: 1AECI00059


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(02:58 min)