The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition where the car looses power especially at higher engine RPM.

This Ignition Coil features the following specifications:

  • New not remanufactured
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function properly for your specific application.

Optimum Performance

Optimal performance, TRQ ignition coils are designed to meet or exceed the requirements of the vehicle.  TRQ ignition coils provide the correct primary and secondary resistance, voltage output, and spark energy that the vehicle needs to restore to its original operating condition.

Premium Quality

Manufactured with quality components and materials by using advanced technology to meet the highest quality control standards in the industry.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Disconnecting the Battery (0:53)
    • Disconnect the negative battery cable with a 10mm wrench
  2. step : Removing the Air Intake Hose (1:09)
    • Loosen the intake hose clamps with a flat blade screwdriver
    • Pull off the air intake hose
  3. step : Removing the Ignition Coil (1:26)
    • Disconnect the ignition coil wiring harness
    • Disconnect the spark plug wires from the ignition coil, one at a time
    • Connect the plug wires to the corresponding spot on the new coil
    • Remove the four 10mm bolts from the ignition coil
    • Pull off the ignition coil
  4. step : Installing the Ignition Coil (3:47)
    • Disconnect the spark plug wires from the new ignition coil, one at a time
    • Connect the plug wires to the corresponding spot on the old coil
    • Put the new ignition coil into place
    • Insert the four 10mm bolts into the ignition coil
    • Disconnect the spark plug wires from the old ignition coil, one at a time
    • Connect the plug wires to the corresponding spot on the new coil
    • Connect the ignition coil wiring harness
  5. step : Installing the Air Intake Hose (7:14)
    • Put the intake hose into place
    • Tighten the intake hose clamps by hand
  6. step : Reconnecting the Battery (7:54)
    • Connect the negative battery cable with a 10mm wrench

Tools needed for replacement:

    Ratchets & Related

  • 1/4 Inch Ratchet
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1996 Chrysler Concorde Ignition Coil V6 3.3L
  • 1993-1997 Chrysler Concorde Ignition Coil V6 3.5L
  • 1992 Chrysler Fifth Avenue Ignition Coil V6 3.3L
  • 1992 Chrysler Fifth Avenue Ignition Coil V6 3.8L
  • 1990-1991 Chrysler Imperial Ignition Coil V6 3.3L
  • 1991-1993 Chrysler Imperial Ignition Coil V6 3.8L
  • 1994-1997 Chrysler LHS Ignition Coil V6 3.5L
  • 1990-1993 Chrysler New Yorker Ignition Coil V6 3.8L
  • 1990-1993 Chrysler New Yorker Ignition Coil V6 3.3L
  • 1994-1996 Chrysler New Yorker Ignition Coil V6 3.5L
  • 1990-1998 Chrysler Town & Country Ignition Coil V6 3.3L
  • 1994-1998 Chrysler Town & Country Ignition Coil V6 3.8L
  • 1990-1998 Dodge Caravan Ignition Coil V6 3.3L
  • 1996-1998 Dodge Caravan Ignition Coil V6 3.8L
  • 1990-1993 Dodge Dynasty Ignition Coil V6 3.3L
  • 1990-1998 Dodge Grand Caravan Ignition Coil V6 3.3L
  • 1994-1998 Dodge Grand Caravan Ignition Coil V6 3.8L
  • 1993-1997 Dodge Intrepid Ignition Coil V6 3.5L
  • 1993-1997 Dodge Intrepid Ignition Coil V6 3.3L
  • 1993-1997 Eagle Vision Ignition Coil V6 3.3L
  • 1993-1997 Eagle Vision Ignition Coil V6 3.5L
  • 1990-1998 Plymouth Grand Voyager Ignition Coil V6 3.3L
  • 1994-1995 Plymouth Grand Voyager Ignition Coil V8 3.8L
  • 1991-1998 Plymouth Voyager Ignition Coil V6 3.3L
  • 1998 Plymouth Voyager Ignition Coil V8 3.8L

This part replaces:

  • Standard Motor Products UF-53T
Part #: 1AECI00008

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(08:21 min)