Ignition Coil Delphi GN10185 - DEECI00058

Specifications:

• Brand New Delphi Ignition Coil
• Built to strict quality control standards
• Direct replacement
• 100% factory tested

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

The ignition coil pack is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. 

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Removing the Ignition Coil (0:36)

• Disconnect the ignition coil wiring harness
• Remove the four T25 bolts from the ignition coil
• Remove the spark plug wires and insert them on the same spot on the new coil
• Remove the old ignition coil

step : Installing the Ignition Coil (1:57)

• Feed the T25 bolts through the ignition coil
• Insert the ignition coil into place
• Tighten the four T25 bolts
• Connect the ignition coil wiring harness
• Push the spark plug wires down into place