Ignition Coil Delphi GN10123 - DEERK00046

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

step : Remove the ignition coil (1:31)

• Use an 8 mm wrench to disconnect your negative battery terminal
• Unbolt the ignition coil with your 7/32 inch socket, ratchet and extension.
• Unplug the spark plug wire.

step : Install the new ignition coil (5:20)

• Bolt the ignition coil down with your 7/32 inch socket.
• Reconnect the spark plug wire.

step : Service the rest of the ignition coils. (7:55)

• Repeat steps 2 and 3 until you have serviced all the coils.
• Do this one at a time so you don’t accidentally mix up your spark plug wires.
• Reconnect your negative battery terminal with your 8 mm wrench.