Specifications:

  • Brand New Delphi Ignition Coils
  • Comes as a Set of 4
  • Direct replacements
  • Built to strict quality control standards

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Part Details

  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Air Intake Box (0:57)
    • Remove the two 8mm bolts holding the top of the air box
    • Remove the two hose clamps with a flat blade screwdriver
    • Twist and remove the two vacuum lines
    • Pull the air intake box up and out
    • Twist the air intake hose collar off
  2. step : Removing the Ignition Coil (2:45)
    • Disconnect the locking tab with a flat blade screwdriver
    • Disconnect the ignition coil wiring harness
    • Remove the 10mm bolt from the engine coil
    • Pull the ignition coil up and out
  3. step : Installing the New Ignition Coil (3:59)
    • Insert the ignition coil into place
    • Insert and tighten the 10mm bolt
    • Connect the ignition coil wiring lead
    • Replace the locking pad
  4. step : Installing the Air Intake Box (5:01)
    • Twist the air intake hose collar into place
    • Insert the air intake box into place
    • Insert the two vacuum lines
    • Insert and tighten the two hose clamps with a flat blade screwdriver
    • Insert and tighten the two 8mm bolts holding the top of the air box

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2006 Chevy Colorado Ignition Coil 4 Piece Set L4 2.8L Delphi GN10114
  • 2004-2006 GMC Canyon Ignition Coil 4 Piece Set L4 2.8L Delphi GN10114
  • 2006 Isuzu i-280 Ignition Coil 4 Piece Set Delphi GN10114
  • 2007-2008 Isuzu i-290 Ignition Coil 4 Piece Set Delphi GN10114

This part replaces:

  • Delphi GN10114
  • Hollander 610-00109
  • OE # 12568062, 8125680620
Part #: DEERK00007

Delphi
Brand #: GN10114

How-to Video:

(07:32 min)