Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
The ignition coil pack is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time.
Why Delphi?
As an Original Equipment Supplier, Delphi Automotive products from 1A Auto come directly from the source. You wont have to worry about going to the dealership for Original Equipment - these parts are the exact same as the original. Delphi products come with the same quality from the dealership at a lower cost to you.
Item Condition:
New
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Once you've got the hood up, you're going to come right over here. We're going to take off these two wing nuts. Lift this cover. Take a peek of your air filter. If it needs to be replaced, now's the time. We'll set that aside. Now, I'm going to remove this from here. You can either take this right off or set it aside. Whatever you want to do. I'm going to take it off. This area right here, you want to make sure that you don't drop anything inside. So, we're going to make sure we cover that with a nice rag. Once we've done that, we'll move along. Now, that we have that out of the way, grab this. Always check your connectors. Set that one aside. Do the same to this one. That looks great. Get this off of here. Give it a little twist. Break it free. Lift it up. Take a peek. Awesome. I can see my mounting bolts down through here. We're going to remove both of those. Now, if you look right down along the side of the coil, you're going to see a 13-millimeter mounting bolt right there. And then on the other side, you'll find another one. We're going to remove both of those, so we can get off the whole housing, and then we'll take off the little bolts that are holding it to that.
Now, this bolt right here you could technically leave in a couple threads, but I like to just take it completely out. Gives me more space. Nice. Now, we're going to remove these bolts right here.
Just double-check. Make sure we've got the right part. Looks great. Now, we're going to use the 7-millimeter. Your application may be different. I'm going to hold the bolt from the backside. I'm going to remove the nut here. Do the same thing on this one. I'm going to pay attention to which way these brackets go because I'm going to install them back on to the new one the same way. Just like that. Let's get those old bolts out of there. I'm going to install my new bolts, of course, right through there. This one comes through here. I'm just going to put them back through the way that I took out the old ones. Grab our new nuts. Okay, snug them up. Yep, that one is good. Do the same to this one. Oh yeah, that looks great. Let's get ready to install this in the vehicle.
It's time to get this back on here. Remember the one with the slot goes towards the driver side. Start in both those bolts, and then we'll snug them up. That one is tight. Tight. Let's get our electrical connectors back on. The black one goes on the passenger side. Slide it right down on there. You got your grey one on the driver side, slides right over the black one. And then, of course, don't forget your coil wire. That's going to go right here, and it goes to the distributor. Perfect.
Let's get this off of there. If you look at the bottom of this, you're going to see this tube. That needs to go down along the side of the engine. There's a little shield that goes along the manifold. I'll show you that in a second. For now, let's get this over the top of this. We'll get this lined up. Get that in. This should set perfectly flush. We're going to put the air filter on and then the cover.
Make sure you snug these right up. Obviously, you don't want any dirty air getting into that engine. Give it a nice wiggle. That feels good. All right. So, this just comes right down along here. You've got your spot on the manifold shield. Put it right on there. Perfect.
