This replacement idler pulley is just what you need to get your vehicle in good working order again!

Specifications:

  • 6 Groove Idler Pulley
    • Includes Bearing
  • Replaces dealer part numbers: 0002020919, 000 202 09 19, 04593848AA, 04792836AA, 68020888AA
  • Outside Diameter: 64mm
  • Width: 26.6mm
  • Direct replacement
  • Built to strict quality control standards

If you are hearing a whirring noise from the front of your engine or if your belt often screeches you may be in need of a new belt tensioner pulley or idler pulley. The tensioner pulley is typically used to redirect the serpentine belt, or help to apply tension against the belt tensioner.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Serpentine Belt (0:49)
    • Familiarize yourself with the serpentine belt with a belt diagram
    • Place the 3/8 drive into the square drive at the bottom of the tensioner
    • Rotate the tensioner clockwise
    • Remove the serpentine belt
  2. step : Removing the Idler Pulley (3:27)
    • Pry off the idler pulley screw cover with a flat blade screwdriver
    • Remove the T40 Torx screw from the idler pulley
    • Pull off the idler pulley
  3. step : Installing the Idler Pulley (5:04)
    • Press the T40 screw and spring washer into the idler pulley
    • Line up the idler pulley
    • Tighten the T40 screw to 21 foot-pounds of torque
    • Press on the screw cover
    • Test that the pulley turns smoothly
  4. step : Installing the Serpentine Belt (5:59)
    • Have the ribs facing the engine, and slide the belt between the tensioner pulley and the engine
    • Flip the belt so the smooth side is touching the tensioner pulley
    • Loop the belt around the crank pulley
    • Bring it around the A/C Compressor
    • Bring it around the power steering pulley
    • Bring it around the idler pulley
    • Bring it around the belt tensioner
    • Pull the tensioner clockwise with the 3/8 inch ratchet
    • Bring it around the alternator
    • Release the tensioner

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T40 Torx Bit

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
I was able to find the part I needed. To confirm it would fit my car. My brother just installed it. All is well
October 4, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Chrysler 300 Idler Pulley V6 2.7L
  • 2005-2010 Chrysler 300 Idler Pulley V6 3.5L
  • 2004-2008 Chrysler Crossfire Idler Pulley
  • 2009-2010 Dodge Challenger Idler Pulley V6 3.5L
  • 2006-2010 Dodge Charger Idler Pulley V6 3.5L
  • 2006-2010 Dodge Charger Idler Pulley V6 2.7L
  • 2005-2008 Dodge Magnum Idler Pulley V6 2.7L
  • 2005-2008 Dodge Magnum Idler Pulley V6 3.5L
  • 2003-2006 Dodge Sprinter Van Idler Pulley
  • 2007 Mercedes Benz C230 Idler Pulley
  • 2001-2005 Mercedes Benz C240 Idler Pulley
  • 1998-2000 Mercedes Benz C280 Idler Pulley
  • 2001-2005 Mercedes Benz C320 Idler Pulley
  • 1998-2000 Mercedes Benz C43 AMG Idler Pulley
  • 2000-2006 Mercedes Benz CL500 Idler Pulley
  • 2001-2002 Mercedes Benz CL55 AMG Idler Pulley
  • 1998-2005 Mercedes Benz CLK320 Idler Pulley
  • 1999-2002 Mercedes Benz CLK430 Idler Pulley
  • 2003-2005 Mercedes Benz CLK500 Idler Pulley
  • 2001-2005 Mercedes Benz CLK55 AMG Idler Pulley
  • 1998-2005 Mercedes Benz E320 Idler Pulley
  • 1998-2002 Mercedes Benz E430 Idler Pulley
  • 2003-2005 Mercedes Benz E500 Idler Pulley
  • 1999-2002 Mercedes Benz E55 AMG Idler Pulley
  • 2002-2005 Mercedes Benz G500 Idler Pulley
  • 1998-2003 Mercedes Benz ML320 Idler Pulley
  • 2003-2005 Mercedes Benz ML350 Idler Pulley
  • 1999-2001 Mercedes Benz ML430 Idler Pulley
  • 2002-2005 Mercedes Benz ML500 Idler Pulley
  • 2000-2003 Mercedes Benz ML55 AMG Idler Pulley
  • 2000-2006 Mercedes Benz S430 Idler Pulley
  • 2000-2006 Mercedes Benz S500 Idler Pulley
  • 2001-2006 Mercedes Benz S55 AMG Idler Pulley
  • 1999-2006 Mercedes Benz SL500 Idler Pulley
  • 2001-2004 Mercedes Benz SLK320 Idler Pulley

This part replaces:

  • OE # 0002020019
Part #: 1AEIP00030

How-to Video:

(07:34 min)