This replacement Idler Arm is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Bolts to RH (Passenger Side) Frame
  • Attaches to relay rod or drag link
  • Direct replacement
  • Built to strict quality control standards
  • Is arm only, does not include mounting bracket
  • Does NOT fit models with Rack & Pinion Steering
  • For Silverado/Sierra 1500 models: Fits Regular and Extended Cab models only
    • Does NOT fit Crew Cab models

Your idler arm connects to the center link on the passenger side of your steering linkage. Typically it supports the right hand side of your steering linkage by bolting to the frame and pivoting the same as the pitman arm. Over time the greasable ends and even the holes in the arm can wear causing loose connections and a sloppy steering feel.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible.

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Idler Arm (0:28)
    • Straighten out the cotter pin
    • Remove the cotter pin
    • Loosen and remove the castle nut
    • Insert a two-jaw puller on both sides of the steering arm
    • Tighten the puller to break the idler arm free
    • Remove the 21mm nuts from the idler bracket
    • Remove the idler arm and bracket
  2. step : Removing the Idler Arm Bracket (4:50)
    • Remove the 24mm nut on the idler arm
    • Remove the idler arm from the idler arm bracket with a two jaw puller
  3. step : Installing the Idler Arm Bracket (7:23)
    • Slide the arm onto the bracket
    • Tighten the 24mm bolt to the idler arm with a 12mm and 24mm wrench
    • Grease the idler arm and bracket
  4. step : Installing the Idler Arm (8:50)
    • Slide the idler arm into place
    • Hand-tighten the 21mm bolt to the bracket
    • Hand-tighten the castle nut
    • Tighten the 21mm bolts to the idler arm bracket
    • Tighten the 21mm castle nut
    • Slide the cotter pin into the castle nut
    • Bend the cotter pin to secure the nut

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 24mm Socket
  • 21mm Socket
  • 12mm Socket

  • Specialty Tools

  • 2 Jaw Gear Puller
  • Grease Gun

  • Wrenches - Metric

  • 12mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:49 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 24mm Socket
  • 21mm Socket
  • 12mm Socket

  • Specialty Tools

  • 2 Jaw Gear Puller
  • Grease Gun

  • Wrenches - Metric

  • 12mm Wrench



This part replaces:

  • OE # 19149615
  • Moog K6534

Vehicle Fit

  • 2002-2006 Cadillac Escalade Idler Arm
  • 2003-2006 Cadillac Escalade ESV Idler Arm
  • 2002-2006 Cadillac Escalade EXT Idler Arm
  • 2002-2006 Chevy Avalanche 1500 Idler Arm
  • 2003-2017 Chevy Express 2500 Van Idler Arm
  • 2003-2017 Chevy Express 3500 Van Idler Arm
  • 1999-2003 Chevy Silverado 1500 4 Wheel Drive Idler Arm
  • 2004-2006 Chevy Silverado 1500 Idler Arm excluding Crew Cab for Models without Rack & Pinion Steering
  • 2007 Chevy Silverado 1500 Classic Idler Arm excluding Crew Cab for Models without Rack & Pinion Steering
  • 2000-2006 Chevy Suburban 1500 Idler Arm
  • 2000 Chevy Tahoe excluding Z71 Models Idler Arm
  • 2001-2006 Chevy Tahoe Idler Arm
  • 2003-2017 GMC Savana 2500 Van Idler Arm
  • 2003-2017 GMC Savana 3500 Van Idler Arm
  • 1999-2003 GMC Sierra 1500 4 Wheel Drive Idler Arm
  • 2004-2006 GMC Sierra 1500 Idler Arm excluding Crew Cab for Models without Rack & Pinion Steering
  • 2007 GMC Sierra 1500 Classic Idler Arm excluding Crew Cab for Models without Rack & Pinion Steering
  • 2000 GMC Yukon excluding Denali Models Idler Arm
  • 2001-2006 GMC Yukon Idler Arm
  • 2000-2006 GMC Yukon XL 1500 Idler Arm
Part #: 1ASIA00011

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More